 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
TMS320VC5507 датащи(PDF) 61 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TMS320VC5507 датащи(HTML) 61 Page - Texas Instruments |
|
|
61 / 108 page  SM320VC5507-EP www.ti.com SPRS613 – SEPTEMBER 2009 5.2.3 Recommended Operating Conditions for CVDD = 1.6 V (200 MHz) over operating free-air temperature range (unless otherwise noted) MIN NOM MAX UNIT CORE CVDD Device supply voltage 1.55 1.6 1.65 V PERIPHERALS RCVDD RTC module supply voltage, core 1.55 1.6 1.65 V RDVDD RTC module supply voltage, I/O (RTCINX1 and RTCINX2) 1.55 1.6 1.65 V USBPLLVDD USBPLL supply voltage(1) 1.55 1.6 1.65 V USBVDD USB module supply voltage, I/O (DP, DN, and PU) 3 3.3 3.6 V Device supply voltage, I/O (except DP, DN, PU, SDA, DVDD 2.7 3.3 3.6 V SCL)(2) ADVDD A/D module digital supply voltage 2.7 3.3 3.6 V AVDD A/D module analog supply voltage 2.7 3.3 3.6 V GROUNDS VSS Supply voltage, GND, I/O, and core 0 V ADVSS Supply voltage, GND, A/D module, digital 0 V AVSS Supply voltage, GND, A/D module, analog 0 V USBPLLVSS Supply voltage, GND, USBPLL 0 V DN and DP(3) 2 SDA & SCL: VDD related 0.7 x DVDD(max) input levels(2) DVDD +0.5 VIH High–level input voltage, I/O V All other inputs (including hysteresis 2 DVDD + 0.3 inputs) DN and DP(3) 0.8 SDA & SCL: VDD related -0.5 0.3 x DVDD input levels(2) VIL Low–level input voltage, I/O V All other inputs (including hysteresis -0.3 0.8 inputs) 0.1 x Vhys Hysteresis level Inputs with hysteresis only V DVDD DN and DP(3) -17 (VOH = 2.45 V) IOH High–level output current mA All other outputs -4 DN and DP(3) 17 (VOL = 0.36 V) IOL Low–level output current mA SDA and SCL(2) 3 All other outputs 4 TC Operating case temperature -55 85 °C (1) USB PLL is susceptible to power supply ripple. The maximum allowable supply ripple is 1% for 1 Hz to 5 kHz; 1.5% for 5 kHz to 10 MHz; 3% for 10 MHz to 100 MHz, and less than 5% for 100 MHz or greater. (2) The I2C pins SDA and SCL do not feature fail-safe I/O buffers. These pins could potentially draw current when the device is powered down. Due to the fact that different voltage devices can be connected to the I2C bus, the level of logic 0 (low) and logic 1 (high) are not fixed and depends on the associated VDD. (3) USB I/O pins DP and DN can tolerate a short circuit at D+ and D − to 0 V or 5 V, as long as the recommended series resistors (see Figure 5-40 ) are connected between the D+ and DP (package), and the D − and DN (package). Do not apply a short circuit to the USB I/O pins DP and DN in absence of the series resistors. Copyright © 2009, Texas Instruments Incorporated Electrical Specifications 61 Submit Documentation Feedback Product Folder Link(s): SM320VC5507-EP |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
