| поискавой системы для электроныых деталей |
|
VSC8504-02 датащи(PDF) 96 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
VSC8504-02 датащи(HTML) 96 Page - Microsemi Corporation |
|
96 / 131 page ![]() Registers VMDS-10507 VSC8504-02 Datasheet Revision 4.2 85 4.6.15 Global Interrupt Status The following table contains the interrupt status from the various sources to indicate which one caused that last interrupt on the pin. 7 Port 1 enhanced serial LED output enable R/W Enable the enhanced serial LED output functionality for port 1 LED pins. 1: Enhanced serial LED outputs 0: Normal function 0 6 Port 0 enhanced serial LED output enable R/W Enable the enhanced serial LED output functionality for port 0 LED pins. 1: Enhanced serial LED outputs 0: Normal function 0 5:3 Serial LED frame rate selection R/W Select frame rate of serial LED stream 000: 2500 Hz frame rate 001: 1000 Hz frame rate 010: 500 Hz frame rate 011: 250 Hz frame rate 100: 200 Hz frame rate 101: 125 Hz frame rate 110: 40 Hz frame rate 111: Output basic serial LED stream See Table 9, page 28. 2:1 Serial LED select R/W Select which LEDs from each PHY to enable on the serial stream 00: Enable all four LEDs of each PHY 01: Enable LEDs 2, 1 and 0 of each PHY 10: Enable LEDs 1 and 0 of each PHY 11: Enable LED 0 of each PHY 00 0 LED port swapping R/W See LED Port Swapping, page 29. Table 88 • Global Interrupt Status, Address 29G (0x1D) Bit Name Access Default Description 15:4 Reserved RO 0x1FF Reserved 3 PHY3 interrupt source(1) RO 1 PHY3 interrupt source indication 0: PHY3 caused the interrupt 1: PHY3 did not cause the interrupt 2 PHY2 interrupt source(1) RO 1 PHY2 interrupt source indication 0: PHY2 caused the interrupt 1: PHY2 did not cause the interrupt 1 PHY1 interrupt source(1) 1. This bit is set to 1 when the corresponding PHY’s Interrupt Status register 26 (0x1A) is read. RO 1 PHY1 interrupt source indication 0: PHY1 caused the interrupt 1: PHY1 did not cause the interrupt 0 PHY0 interrupt source(1) RO 1 PHY0 interrupt source indication 0: PHY0 caused the interrupt 1: PHY0 did not cause the interrupt Table 87 • Enhanced LED Control, Address 25G (0x19) (continued) Bit Name Access Description Default |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |