| поискавой системы для электроныых деталей |
|
MPF0900AMBA2ES датащи(PDF) 128 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
MPF0900AMBA2ES датащи(HTML) 128 Page - NXP Semiconductors |
|
128 / 205 page ![]() NXP Semiconductors PF09 Nine-channel power management IC with advanced system safety monitoring OTP_VMONx_UVTH[2:0] UV threshold 101 94.0 % 110 93.5 % 111 93.0 % Table 167. VMONx UV threshold configuration bits...continued The overvoltage monitoring threshold for the VMONx block is set in the OTP registers via the OTP_VMONx_OVTH[2:0] bits. OTP_VMONx_OVTH[2:0] OV threshold 000 103.5 % 001 104.0 % 010 104.5 % 011 105.0 % 100 105.5 % 101 106.0 % 110 106.5 % 111 107.0 % Table 168. VMONx OV threshold configuration bits For safety considerations, the OV/UV monitoring thresholds are selected in OTP during the part number configuration phase, and they are not allowed to be changed during system operation. However, the system can choose to open the monitoring range during the Monitored STANDBY state in order to accommodate larger DC/ AC output voltage accuracy on the voltage regulator being monitored by the VMONx block. The VMONx_UVTH_STBY and VMONx_OVTH_STBY bits are provided to select whether to use the same OV/UV monitoring threshold in RUN and STANDBY states or force the maximum OV/UV monitoring threshold during the STANDBY state. VMONx_UVTH_STBY UV threshold in STANDBY 0 Same as RUN state 1 Open to maximum threshold Table 169. VMONx UV threshold selection in STANDBY VMONx_OVTH_STBY OV thresholdin STANDBY 0 Same as RUN state 1 Open to maximum threshold Table 170. VMONx OV threshold selection in STANDBY By default, the VMONx_UVTH_STBY and VMONx_OVTH_STBY bits are set to 1 at power up, and the MCU can modify their values before requesting access to the STANDBY states. The UV and OV thresholds represent percentages of the nominal voltage programmed on each VMON block. Setting the thresholds ensures that an undervoltage condition below the selected UV threshold or an overvoltage condition above the selected OV threshold will always be detected by the VMON circuit. PF09 All information provided in this document is subject to legal disclaimers. © 2026 NXP B.V. All rights reserved. Product data sheet Rev. 1.3 — 16 December 2025 Document feedback 128 / 205 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |