| поискавой системы для электроныых деталей |
|
MPF0900AMBA2ES датащи(PDF) 72 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
MPF0900AMBA2ES датащи(HTML) 72 Page - NXP Semiconductors |
|
72 / 205 page ![]() NXP Semiconductors PF09 Nine-channel power management IC with advanced system safety monitoring The RSTB_S2H flag is provided to sense a real time short-to-high condition in the RSTB pin. When the RSTB pin is being driven low internally, and the RSTB_S is sensing a high state, the RSTB_S2H flag is set HIGH until this condition is removed. The RSTB_S2L flag is provided to sense a real-time short-to-low condition in the RSTB pin. When the RSTB pin is released high internally, and the RSTB_S is sensing a low state, the RSTB_S2L flag is set HIGH until condition is removed. The system can request a self-reset pulse via the SYS_CMD bits. When SYS_CMD = 0x9C, the RSTB pin will assert for 100 μs and then de-assert to its normal state. When the RSTB pin is directed to assert by the MCU, the PF09 will monitor the pin during the 100 μs assertion time to ensure the pin is able to go low. If the pin is not able to go low, the device detects a short-to high-event and asserts the RSTB_FLT_I flag. 12.8.6 PGOOD PGOOD is a dedicated open-drain output used as a power good (PG) indicator. In the application, PGOOD can be pulled up to VDDIO (1.8 V or 3.3 V) with a 10 kΩ to 100 kΩ external resistor. The PF09 implements an individual power good monitor for every regulator and voltage monitor available in the device. Each PG monitor reports its status via I2C registers. The status of the PGOOD pin is a logic AND function of the internal PG signals of the selected voltage monitors. The selection of the regulators being reported by the PGOOD pin is done via the PG_EN bits. PG_EN bits Option PGOOD Control 0 SW1 does not control PGOOD SW1_PG_EN 1 SW1 controls PGOOD 0 SW2 does not control PGOOD SW2_PG_EN 1 SW2 controls PGOOD 0 SW3 does not control PGOOD SW3_PG_EN 1 SW3 controls PGOOD 0 SW4 does not control PGOOD SW4_PG_EN 1 SW4 controls PGOOD 0 SW5 does not control PGOOD SW5_PG_EN 1 SW5 controls PGOOD 0 LDO1 does not control PGOOD LDO1_PG_EN 1 LDO1 controls PGOOD 0 LDO2 does not control PGOOD LDO2_PG_EN 1 LDO2 controls PGOOD 0 LDO3 does not control PGOOD LDO3_PG_EN 1 LDO3 controls PGOOD 0 VAON does not control PGOOD VAON_PG_EN 1 VAON controls PGOOD Table 72. Voltage reels PGOOD triggers PF09 All information provided in this document is subject to legal disclaimers. © 2026 NXP B.V. All rights reserved. Product data sheet Rev. 1.3 — 16 December 2025 Document feedback 72 / 205 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |