ADFS7124-8BBCPZ datasheet(91/93 Pages) AD

91 / 93 page

Data Sheet

ADFS7124-8

ON-CHIP REGISTERS

analog.com

Rev. 0 | 91 of 93

Table 74. Configuration Register Bit Descriptions (Continued)

Bits

Bit Name

Description

00 = burnout current source off (default).

01 = burnout current source on, 0.5 μA.

10 = burnout current source on, 2 μA.

11 = burnout current source on, 4 μA.

REF_BUFP

Buffer enable on REFINx(+). When this bit is set, the positive reference input (internal or external) is buffered. When this bit is cleared, the positive

reference input (internal or external) is unbuffered.

REF_BUFM

Buffer enable on REFINx(−). When this bit is set, the negative reference input (internal or external) is buffered. When this bit is cleared, the

negative reference input (internal or external) is unbuffered.

AIN_BUFP

Buffer enable on AINP. When this bit is set, the selected positive analog input pin is buffered. When this bit is cleared, the selected positive analog

input pin is unbuffered.

AIN_BUFM

Buffer enable on AINM. When this bit is set, the selected negative analog input pin is buffered. When this bit is cleared, the selected negative

analog input pin is unbuffered.

4:3

REF_SEL

Reference source select bits. These bits select the reference source to use when converting on any channels using this configuration register.

00 = REFIN1(+)/REFIN1(−).

01 = REFIN2(+)/REFIN2(−).

10 = internal reference.

11 = AVDD.

2:0

PGA

Gain select bits. These bits select the gain to use when converting on any channels using this configuration register.

PGA

Gain

Input Range When VREF = 2.5 V (Bipolar Mode)

000

±2.5 V

001

±1.25 V

010

± 625 mV

011

±312.5 mV

100

±156.25 mV

101

±78.125 mV

110

±39.06 mV

111

128

±19.53 mV

FILTER REGISTERS

RS[5:0] = 1, 0, 0, 0, 0, 1 to 1, 0, 1, 0, 0, 0

Power-On/Reset = 0x060180

The ADFS7124-8 has eight filter registers, FILTER_0 to FILTER_7. Each filter register is associated with a setup; FILTER_x is associated with

Setup x. In the filter register, the filter type and output word rate are set.

Table 75 outlines the bit designations for the register. Bit 15 is the first bit of the data stream. The number in parentheses indicates the

power-on/reset default status of that bit.

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

Filter (0)

REJ60(0)

POST_FILTER(0)

SINGLE_CYCLE(0)

0(0)

FS[10:8](0)

FS[7:0](0)

Table 75. Filter Register Bit Descriptions

Bits

Bit Name

Description

23:21

Filter

Filter type select bits. These bits select the filter type.

000 = sinc4 filter (default).

001 = reserved.

010 = sinc3 filter.

ADFS7124-8BBCPZ датащи(PDF) 91 Page - Analog Devices

ADFS7124-8BBCPZ датащи(HTML) 91 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93

датащи скачать

ссылки URL