MT9072AB datasheet(30/275 Pages) ZARLINK

30 / 275 page

MT9072

Data Sheet

Zarlink Semiconductor Inc.

115

130

155

M15

G13

C15

DSTo[1]

DSTo[2]

DSTo[3]

DSTo[5]

DSTo[6]

DSTo[7]

Data ST-BUS. In 2.048 Mbit/s ST-BUS mode and IMA mode this pin is

an output for the receive side of the framer. This pin is not used in

8.192 Mbit/s ST-BUS mode. Pins DSTo[0-7] are used by Framers[0-7]

respectively.

In T1 mode, this pin outputs 2.048 Mbit/s ST-BUS data. The first 24

channels contain the 24 8-bit channels received on the PCM24

interface. Channel 31 bit 0 contains the received S-bit in D4 and ESF

modes. See Table 1.The DSTo data stream is clocked out of the

framer by the clock input to pin CKi. The DSTo pin is enabled if the

DSToEN control bit (Address YF1) is set to 1.

In T1 IMA mode, this pin outputs the 1.544 Mbit/s received serial

stream. The serial stream contains the framing bit followed by the 24

8-bit channels received on the PCM24 interface. See Table 3. In IMA

mode the DSTo data stream is clocked out of the framer by the clock

output by the RxDLC pin. The DSto pin is enabled if the DSToEN

control bit (Address YF1) is set to 1. IMA mode is selected by setting

the IMA bit (Address Y00) to 1.

In E1 mode, this pin outputs 2.048 Mbit/s ST-BUS data. The 32

channels contain the 32 channels of data received on the PCM30

interface. See Table 4 and Table 6. The DSTo data stream is clocked

out of the framer by the clock input to pin CKi. The DSTo pin is

enabled if the DSToE control bit (Address Y02) is set to 1.

In E1 IMA mode, this pin outputs the 2.048 Mbit/s received serial

stream. See Table 4 and Table 6. In IMA mode the DSTo data stream

is clocked out of the framer by the clock output by the RxDLC pin. The

DSTo pin is enabled if the DSToE control bit (Address Y02) is set to 1.

IMA mode is selected by setting the IMA bit (Address Y00) to 1.

T14

CSTi[0]

CSTi[4]

Control ST-BUS. This pin is the signaling input for the transmit side of

the framer. In 2.048 Mbit/s ST-BUS mode it operates the same as

CSTi(1-3), it can also operate in 8.192 Mbit/s ST-BUS mode. The CSTi

data stream is clocked into the framer by the clock input to pin CKi.

This pin has no function in IMA mode.

When operated in 8.192 Mbit/s ST-BUS mode this pin accepts a data

stream containing 128 8-bit channels accommodating four framers.

See Table 2 and Table 5. The frame boundary is indicated by the FPi

inputs. Pin CSTi[0] is used by Framers[0-3] and pin CSTi[4] is used by

Framers[4-7].

The 32 ST-BUS channels mapped to each framer are treated as

described for CSTi(1-3) operating at 2.048 Mbit/s.

Pin Description (continued)

Pin #

Name

Type

Description (see Notes 1 to 7)

LQFP

LBGA

MT9072AB датащи(PDF) 30 Page - Zarlink Semiconductor Inc

MT9072AB датащи(HTML) 30 Page - Zarlink Semiconductor Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL