HC705MC4GRSSLASHD datasheet(123/180 Pages) NXP

123 / 180 page

Serial Communications Interface

SCI Operation

General Release Specification

Serial Communications Interface

Writing a logic 1 to the TE bit in SCI control register 2 (SCCR2), and then

writing data to the SCDR, begins the transmission. At the start of a

transmission, transmitter control logic automatically loads the transmit

shift register with a preamble of logic 1s. After the preamble shifts out,

the control logic transfers the SCDR data into the shift register. A logic 0

start bit automatically goes into the least significant bit position of the

shift register, and a logic 1 stop bit goes into the most significant bit

position.

When the data in the SCDR transfers to the transmit shift register, the

transmit data register empty (TDRE) flag in the SCI status register

(SCSR) becomes set. The TDRE flag indicates that the SCDR can

accept new data from the internal data bus.

When the shift register is not transmitting a character, the PB4/TDO

(transmit data out) pin goes to the idle condition, logic 1. If software

clears the TE bit during the idle condition and while TDRE is set, the

transmitter relinquishes control of the PB4/TDO pin (acting as a

three-stated input port pin).

11.5.1.3 Break Characters

Writing a logic 1 to the SBK bit in SCCR2 loads the shift register with a

break character. A break character contains all logic 0s and has no start

and stop bits. Break character length depends on the M bit in SCCR1.

As long as SBK is at logic 1, transmitter logic continuously loads break

characters into the shift register. After software clears the SBK bit, the

shift register finishes transmitting the last break character and then

transmits at least one logic 1. The automatic logic 1 at the end of a break

character is to guarantee the recognition of the start bit of the next

character.

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

HC705MC4GRS/D датащи(PDF) 123 Page - NXP Semiconductors