M16CSLASH26 datasheet(231/239 Pages) RENESAS

231 / 239 page

Appendix Standard Serial I/O Mode 2 (Flash Memory Version)

225

Renesas Technology Corp.

M16C/26 Group

SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Under

development

Preliminary Specifications Rev. 0.9

Specifications in this manual are tentative and subject to change.

Block Erase Command

This command erases the data in the specified block. Execute the block erase command as explained

here following.

(1) Transfer the “2016” command code with the 1st byte.

(2) Transfer addresses A8 to A15 and A16 to A23 with the 2nd and 3rd bytes respectively.

(3) Transfer the verify command code “D016” with the 4th byte. With the verify command code, the

erase operation will start for the specified block in the flash memory. Write the highest address of

the specified block for addresses A8 to A23.

After block erase ends, the result of the block erase operation can be known by reading the status

Each block can be erase-protected with the lock bit. For more information, see the section on the data

protection function.

Figure 1.23.6. Timing for block erasing

A8 to

A15

A16 to

A23

2016

D016

RxD1

TxD1

(M16C reception data)

(M16C transmit data)

RxD1

TxD1

A716

D016

(M16C reception data)

(M16C transmit data)

Erase All Code Blocks Command

This command erases the content of all code blocks. Execute the erase all code blocks command as

explained here following.

(1) Transfer the “A716” command code with the 1st byte.

(2) Transfer the verify command code “D016” with the 2nd byte. With the verify command code, the

erase operation will start and continue for all code blocks in the flash memory.

The result of the erase operation can be known by reading the status register.

Figure 1.23.7. Timing for erasing all code blocks.

M16C/26 датащи(PDF) 231 Page - Renesas Technology Corp

M16C/26 датащи(HTML) 231 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL