| поискавой системы для электроныых деталей |
|
M16C/26 датащи(PDF) 31 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M16C/26 датащи(HTML) 31 Page - Renesas Technology Corp |
|
31 / 239 page ![]() Processor Mode 25 Renesas Technology Corp. M16C/26 Group SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER Under development Preliminary Specifications Rev. 0.9 Specifications in this manual are tentative and subject to change. Processor Mode This device functions in single-chip mode only. In single-chip mode, only internal memory space (SFR, internal RAM, and internal ROM) can be accessed. Ports P1_5 to P1_7, P6, P7, P8, P9_0 to P9_3 and P10 can be used as programmable I/O ports or as I/O ports for the internal peripheral functions. Figure 1.7.1 shows the processor mode registers 0 and 1. Figure 1.7.2 shows the processor mode register 2. Figure 1.7.1. Processor mode register 0 and 1 Processor mode register 0 (Note) Symbol Address When reset PM0 000416 0016 Bit name Function Bit symbol W R b7 b6 b5 b4 b3 b2 b1 b0 PM03 Software reset bit The device is reset when this bit is set to 1. The value of this bit is 0 when read. Note: Set bit 1 of the protect register (address 000A16) to 1 when writing new values to this register. Reserved Bit Must always be set to "0". Reserved Bit Must always be set to "0". 0 0 0 0 0 0 0 Note 3: When EW entry bit (FMR01) =1, this bit is automatically set to 1 during that time. Note 4: To access the two 2K byte data blocks in address range F80016 to FFFF16, this bit must be set to 1. Processor mode register 1 (Note 1) Symbol Address When reset PM1 000516 000010002 Bit name Function Bit symbol W R b7 b6 b5 b4 b3 b2 b1 b0 Flash data block access bit (Note 4) 0: Disabled 1: Enabled (Note 3) Note 1: Set bit 1 of the protect register (address 000A16) to 1 when writing new values to this register. Note 2: This bit can only be set to 1. PM17 Wait bit 0 : No wait state 1 : Wait state inserted 0 . Reserved bit Must always be set to 0 . The value, if read, turns out to be indeterminate. 0 : Interrupt 1 : Reset (Note 2) Watchdog timer function select bit PM12 PM10 Reserved bit Reserved bit Must always be set to "0". Must always be set to "1". Reserved bit Must always be set to "0". 00 0 1 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |