| поискавой системы для электроныых деталей |
|
ADP1055ACPZ-R7 датащи(PDF) 124 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADP1055ACPZ-R7 датащи(HTML) 124 Page - Analog Devices |
|
124 / 140 page ![]() ADP1055 Data Sheet Rev. A | Page 124 of 140 Table 232. Register 0xFE95—FIRST_FAULT_ID Bits Bit Name R/W Description [7:0] First-fault ID (in hex) R 0x00 = no fault 0x01 = VOUT_OV 0x02 = VOUT_OV_FAST 0x03 = VOUT_UV 0x04 = IOUT_OC_LV 0x05 = VIN_OV 0x06 = VIN_UV 0x07 = OT 0x08 = TON_MAX 0x09 = POUT_OP 0x0A = GPIO1 0x0B = GPIO2 0x0C = GPIO3 0x0D = GPIO4 0x0E = IOUT_OC 0x0F = IOUT_OC_FAST 0x10 = IOUT_UC 0x11 = IOUT_UC_FAST 0x12 = IIN_OC 0x13 = IIN_OC_FAST 0x14 = ISHARE Table 233. Register 0xFE96—VFF_VALUE Bits Bit Name R/W Description [15:0] VFF value R This register contains the feedforward information. This value has 12 bits of resolution from Bit 13 to Bit 2. Table 234. Register 0xFE97—VS_VALUE Bits Bit Name R/W Description [15:0] VS value (output voltage) R This register contains the output voltage information. This value has 12 bits of resolution from Bit 13 to Bit 2. Table 235. Register 0xFE98—CS1_VALUE Bits Bit Name R/W Description [15:0] CS1 value (input current) R This register contains the input current information. This value has 12 bits of resolution from Bit 13 to Bit 2. Table 236. Register 0xFE99—CS2_VALUE Bits Bit Name R/W Description [15:0] CS2 value (output current) R This register contains the 12-bit output current information. This value is the voltage drop across the sense resistor. To obtain the current value, divide the value of this register by the sense resistor value. The CS2± pins have a full-scale input range of 30 mV, 60 mV, or 480 mV (set in Register 0xFE4F[1:0]). When the CS2 input range is set to 30 mV, the LSB step size is 7.32 μV. For example, at a 15 mV input signal on CS2, the value in this register is 15 mV/7.32 μV = 1000 0000 0000. Table 237. Register 0xFE9A—POUT_VALUE Bits Bit Name R/W Description [15:0] CS2 × VS value (output power) R This register contains the 16-bit output power information. This value is the product of the remote output voltage value (VS) and the output current reading (CS2). |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |