| поискавой системы для электроныых деталей |
|
AD9549 датащи(PDF) 74 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9549 датащи(HTML) 74 Page - Analog Devices |
|
74 / 78 page ![]() AD9549 Preliminary Technical Data Rev. PrA | Page 74 of 78 0308; S1 Pin Configuration (See “Status and Warnings” on Page 48.) Note: The choice of input for a given pin must be all Ref A or all Ref B, and not a combination thereof. [0] IRQ: Select “IRQ” signal for output on this pin [1] Reserved [2] Frequency Lock: Select “Frequency Lock” signal for output on this pin [3] Phase Lock: Select “Phase Lock” signal for output on this pin [4] Ref? Not Valid: Select either RefA (0) or RefB (1) “Not Valid” signal for output on this pin [5] Ref? OOL: Select either RefA (0) or RefB (1) “OOL” signal for output on this pin [6] Ref?: LOR: Select either RefA (0) or RefB (1) “LOR” signal for output on this pin [7] Ref?: Choose either RefA (0) or RefB (1) for use with bits 4 – 6 0309; S2 Pin Configuration: Same as register 0308, except applies to pin S2 030A; S3 Pin Configuration: Same as register 0308, except applies to pin S3 030B; S4 Pin Configuration: Same as register 0308, except applies to pin S4 030C; Control [0] Enable Frequency Lock Detector. Register 0319 must be set up to use this. See “Frequency Lock Detection” on Page 32. [1] Enable Phase Lock Detector: Register 0314h-0318h must be set up to use this. See “Phase Lock Detection” on Page 31. [3:2] Unused [4] Enable RefB OOL: The RefB OOL limits are set up in Registers 032C to 0335. [5] Enable RefB LOR: The RefA LOR limits are set up in Registers 0320 to 0321. [6] Enable RefA OOL: The RefB OOL limits are set up in Registers 0322 to 032B. [7] Enable RefA LOR: The RefB LOR limits are set up in Registers 031E to 031F. 030D; Unused 030E – 0313; HFTW; Read-Only [47:0] Average or Instantaneous FTW: This read-only register is the output of FTW monitor. Average or Instantaneous is determined by “Holdover Mode” (see Bit 4, Register 01C0). These registers must be manually refreshed by issuing an IO_UPDATE. 0314 – 0317; Phase Lock [31:0] Phase Lock Threshold: See “Phase Lock Detection” on Page 31. 0318; Phase Lock (continued) [7:5] Phase Unlock Watchdog Timer : See “Phase Lock Detection” on Page 31. [4:0] Phase Lock Watchdog Timer : See “Phase Lock Detection” on Page 31. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |