| поискавой системы для электроныых деталей |
|
VSC7440 датащи(PDF) 116 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
VSC7440 датащи(HTML) 116 Page - Microsemi Corporation |
|
116 / 444 page ![]() Functional Descriptions VMDS-10492 VSC7440 Datasheet Revision 4.2 99 CUSTOM_ACE_ENA Controls S2 custom rule selection: Bit 0: Selects custom key to use (0: CUSTOM_1, 1: CUSTOM_2). Bit 1: Enables custom key for first lookup. Bit 2: Enables custom key for second lookup. 3x CUSTOM_ACE_OFFSET Selects custom data extraction point: 0: Current position (after IFH.WORD16_POP_CNT). Only applicable to frame type ETH. 1: Link layer payload (after VLAN tags and EtherType for ETH, after control word for CW). 2: Link layer payload + 20 bytes. 3: Link layer payload + 40 bytes. 2x PAG_OVERRIDE_MASK Bits set in this mask override the previous PAG result with the PAG_VAL value from this action. 8x x x PAG_VAL PAG is updated using the following bit mask operation: PAG = (PAG and ~PAG_OVERRIDE_MASK) | (PAG_VAL and PAG_OVERRIDE_MASK). PAG can be used to tie VCAP CLM lookups with VCAP IS2 lookups. The PAG default value is configurable per port in ANA_CL:PORT:PORT_ID_CFG.PAG_VAL. 8x x x RESERVED Must be set to 0. 7 x LPORT_NUM Use this value for LPORT and IFH.SRC_PORT when LPORT_ENA is set. 6x MATCH_ID Logical ID for the entry. If the frame is forwarded to the CPU, the MATCH_ID is extracted together with the frame. MATCH_ID is used together with MATCH_ID_MASK as follows: MATCH_ID = (MATCH_ID and ~MATCH_ID_MASK) | (MATCH_ID and MATCH_ID_MASK). The result is placed in IFH.CL_RSLT. 12 x MATCH_ID_MASK Bits set in this mask overrides the previous MATCH_ID with the MATCH_ID value from this action. 12 x PIPELINE_FORCE_ENA If set, use PIPELINE_PT unconditionally. Overrule previous settings of pipeline point. Use the following pipeline actions: 0: No change to PIPELINE_PT or PIPELINE_ACT. 1: Change PIPELINE_PT and set PIPELINE_ACT=XTR 2: Change PIPELINE_PT and set PIPELINE_ACT=INJ (PIPELINE_ACT_SEL=0) or INJ_MASQ (PIPELINE_ACT_SEL=1) 3: Change PIPELINE_PT and set PIPELINE_ACT=LBK_QS (PIPELINE_ACT_SEL=0) or LBK_ASM (PIPELINE_ACT_SEL=1) 2 xxxx Table 65 • VCAP CLM Actions (continued) Field Name Description and Encoding Size |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |