SC2200 datasheet(184/433 Pages) NSC

184 / 433 page

www.national.com

184

Revision 3.0

Core Logic Module (Continued)

5.3

The Core Logic module is a multi-function module. Its reg-

ister space can be broadly divided into three categories in

which specific types of registers are located:

Chipset Register Space (F0-F5) (Note that F4 is for

Video Processor support, see Section 6.3.1 on page

334 for register descriptions): Comprised of six sepa-

rate functions, each with its own register space, con-

sisting of PCI header registers and configuration

registers.

The PCI header is a 256-byte region used for configur-

ing a PCI device or function. The first 64 bytes are the

same for all PCI devices and are predefined by the

PCI specification. These registers are used to config-

ure the PCI for the device. The rest of the 256-byte

region is used to configure the device or function itself.

USB Controller Register Space (PCIUSB): Consists of

the standard PCI header registers. The USB controller

supports three ports and is OpenHCI compliant.

ISA Legacy Register Space (I/O Ports): Contains all

the legacy compatibility I/O ports that are internal,

trapped, shadowed, or snooped.

The following subsections provide:

• A brief discussion on how to access the registers

located in PCI Configuration Space.

• Core Logic module register summaries.

• Bit formats for Core Logic module registers.

5.3.1

PCI Configuration Space and Access Methods

Configuration cycles are generated in the processor. All

configuration registers in the Core Logic module are

accessed through the PCI interface using the PCI Type

One Configuration Mechanism. This mechanism uses two

DWORD I/O locations at 0CF8h and 0CFCh. The first loca-

tion (0CF8h) references the Configuration Address register.

The second location (0CFCh) references the Configuration

Data Register (CDR).

To access PCI configuration space, write the Configuration

Address (0CF8h) Register with data that specifies the Core

Logic module as the device on PCI being accessed, along

with the configuration register offset. On the following

cycle, a read or write to the Configuration Data Register

(CDR) causes a PCI configuration cycle to the Core Logic

module. Byte, WORD, or DWORD accesses are allowed to

CDR at 0CFCh, 0CFDh, 0CFEh, or 0CFFh.

The Core Logic module has seven PCI configuration regis-

ter sets, one for each function (F0-F5) and USB (PCIUSB).

Base Address Registers (BARx) in F0-F5 and PCIUSB set

the base addresses for additional I/O or memory mapped

configuration registers for each function.

Table 5-13 shows the PCI Configuration Address Register

(0CF8h) and how to access the PCI header registers.

Table 5-13. PCI Configuration Address Register (0CF8h)

Configuration

Space Mapping

Reserved

Bus Number

Device Number

Function

Index

DWORD

1 (Enable)

000 000

0000 0000

xxxx x (Note)

xxx

xxxx xx

00 (Always)

Function 0 (F0): Bridge Configuration, GPIO and LPC Configuration Register Space

80h

0000 0000

1001 0 or 1000 0

000

Index

Function 1 (F1): SMI Status and ACPI Timer Configuration Register Space

80h

0000 0000

1001 0 or 1000 0

001

Index

Function 2 (F2): IDE Controller Configuration Register Space

80h

0000 0000

1001 0 or 1000 0

010

Index

Function 3 (F3): XpressAUDIO Configuration Register Space

80h

0000 0000

1001 0 or 1000 0

011

Index

Function 4 (F4): Video Processor Configuration Register Space

80h

0000 0000

1001 0 or 1000 0

100

Index

Function 5 (F5): X-Bus Expansion Configuration Register Space

80h

0000 0000

1001 0 or 1000 0

101

Index

PCIUSB: USB Controller Configuration Register Space

80h

0000 0000

1001 1 or 1000 1

000

Index

Note:

The device number depends upon the IDSEL Strap Override bit (F5BAR0+I/O Offset 04h[0]). This bit allows selection of the

address lines to be used as the IDSEL. By Default: IDSEL = AD28 (1001 0) for F0-F5, AD29 (1001 1) for PCIUSB.

SC2200 датащи(PDF) 184 Page - National Semiconductor (TI)

SC2200 датащи(HTML) 184 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL