HC705C9AGRSSLASHD datasheet(109/157 Pages) NXP

номер детали	HC705C9AGRS/D

подробное описание детали	General Release Specification

PDF	157 Pages

Scroll/Zoom	100%

производитель	NXP [NXP Semiconductors]

домашняя страница	http://www.nxp.com

Logo

109 / 157 page

General Release Specification

SPI Registers

MC68HC705C9A — Rev. 2.0

Serial Peripheral Interface

10.6.3 Serial Peripheral Data I/O Register (SPDR)

The serial peripheral data I/O register, shown in Figure 10-6, is used to

transmit and receive data on the serial bus. Only a write to this register

will initiate transmission/reception of another byte and this will only occur

in the master device. At the completion of transmitting a byte of data, the

SPIF status bit is set in both the master and slave devices.

When the user reads the serial peripheral data I/O register, a buffer is

actually being read. The first SPIF must be cleared by the time a second

transfer of the data from the shift register to the read buffer is initiated or

an overrun condition will exist. In cases of overrun, the byte which

causes the overrun is lost.

A write to the serial peripheral data I/O register is not buffered and

places data directly into the shift register for transmission.

$000C

Bit 7

654321

Bit 0

Read:

SPD7

SPD6

SPD5

SPD4

SPD3

SPD2

SPD1

SPD0

Write:

Reset:

UUUUUUUU

U = Undetermined

Figure 10-6. PI Data Register (SPDR)

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

HC705C9AGRS/D датащи(PDF) 109 Page - NXP Semiconductors