HC705C9AGRSSLASHD datasheet(77/157 Pages) NXP

номер детали	HC705C9AGRS/D

подробное описание детали	General Release Specification

PDF	157 Pages

Scroll/Zoom	100%

производитель	NXP [NXP Semiconductors]

домашняя страница	http://www.nxp.com

Logo

77 / 157 page

General Release Specification

Timer During Wait Mode

MC68HC705C9A — Rev. 2.0

Capture/Compare Timer

8.5 Timer During Wait Mode

The CPU clock halts during the wait mode, but the timer remains active.

If interrupts are enabled, a timer interrupt will cause the processor to exit

the wait mode.

8.6 Timer During Stop Mode

In the stop mode, the timer stops counting and holds the last count value

if STOP is exited by an interrupt. If STOP is exited by RESET, the

counters are forced to $FFFC. During STOP, if at least one valid input

capture edge occurs at the TCAP pins, the input capture detect circuit is

armed. This does not set any timer flags or wake up the MCU, but if an

interrupt is used to exit stop mode, there is an active input capture flag

and data from the first valid edge that occurred during the stop mode. If

RESET is used to exit stop mode, then no input capture flag or data

remains, even if a valid input capture edge occurred.

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

HC705C9AGRS/D датащи(PDF) 77 Page - NXP Semiconductors