K32L2AX datasheet(96/96 Pages) NXP

96 / 96 page

design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit

for the customer’s applications and products planned, as well as for the planned application and use of customer’s

third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks

associated with their applications and products.

NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on

any weakness or default in the customer’s applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using

NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). NXP does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of

IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation

of the device at these or any other conditions above those given in the Recommended operating conditions section (if

present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting

values will permanently and irreversibly affect the quality and reliability of the device.

Terms and conditions of commerical sale — NXP Semiconductors products are sold subject to the general terms

and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a

valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the

respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of NXP Semiconductors products by customer.

Hazardous voltage — Although basic supply voltages of the product may be much lower, circuit voltages up to 60 V

may appear when operating this product, depending on settings and application. Customers incorporating or otherwise

using these products in applications where such high voltages may appear during operation, assembly, test etc. of such

application, do so at their own risk. Customers agree to fully indemnify NXP Semiconductors for any damages resulting

from or in connection with such high voltages. Furthermore, customers are drawn to safety standards (IEC 950, EN 60

950, CENELEC, ISO, etc.) and other (legal) requirements applying to such high voltages.

Export control — This document as well as the item(s) described herein may be subject to export control regulations.

Export might require a prior authorization from competent authorities.

NXP, the NXP logo, NXP SECURE CONNECTIONS FOR A SMARTER WORLD, EdgeLock, are trademarks of

NXP B.V. All other product or service names are the property of their respective owners. AMBA, Arm, Arm7,

Arm7TDMI, Arm9, Arm11, Artisan, big.LITTLE, Cordio, CoreLink, CoreSight, Cortex, DesignStart, DynamIQ, Jazelle,

Keil, Mali, Mbed, Mbed Enabled, NEON, POP, RealView, SecurCore, Socrates, Thumb, TrustZone, ULINK, ULINK2,

ULINK-ME, ULINK-PLUS, ULINKpro, µVision, Versatile are trademarks or registered trademarks of Arm Limited (or its

subsidiaries) in the US and/or elsewhere. The related technology may be protected by any or all of patents, copyrights,

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

Date of release: 02/2021

Document identifier: K32L2Ax

K32L2AX датащи(PDF) 96 Page - NXP Semiconductors