PIC16C71 datasheet(97/337 Pages) MICROCHIP

97 / 337 page

DS30234D-page 97

PIC16C6X

Figure 11-19 and Figure 11-20 show Master-transmit-

ter and Master-receiver data transfer sequences.

When a master does not wish to relinquish the bus (by

generating a STOP condition), a repeated START con-

dition (Sr) must be generated. This condition is identi-

cal to the start condition (SDA goes high-to-low while

SCL is high), but occurs after a data transfer acknowl-

edge pulse (not the bus-free state). This allows a mas-

ter to send “commands” to the slave and then receive

the requested information or to address a different

slave device. This sequence is shown in Figure 11-21.

FIGURE 11-19: MASTER-TRANSMITTER SEQUENCE

FIGURE 11-20: MASTER-RECEIVER SEQUENCE

FIGURE 11-21: COMBINED FORMAT

For 7-bit address:

Slave Address

First 7 bits

R/W A1 Slave Address

Second byte

Data A

Data

A master transmitter addresses a slave receiver

with a 10-bit address.

A/A

Slave Address R/W A Data A Data A/A P

'0' (write)

data transferred

(n bytes - acknowledge)

A master transmitter addresses a slave receiver with a

7-bit address. The transfer direction is not changed.

From master to slave

From slave to master

A = acknowledge (SDA low)

A = not acknowledge (SDA high)

S = Start Condition

P = Stop Condition

(write)

For 10-bit address:

For 7-bit address:

Slave Address

First 7 bits

R/W A1 Slave Address

Second byte

A master transmitter addresses a slave receiver

with a 10-bit address.

Slave Address R/W A Data A Data A P

'1' (read)

data transferred

(n bytes - acknowledge)

A master reads a slave immediately after the ﬁrst byte.

From master to slave

From slave to master

A = acknowledge (SDA low)

A = not acknowledge (SDA high)

S = Start Condition

P = Stop Condition

(write)

For 10-bit address:

Slave Address

First 7 bits

R/W A3

Data A

Data

(read)

Combined format:

Combined format - A master addresses a slave with a 10-bit address, then transmits

Slave Address R/W A Data A/A Sr

(read)

Sr = repeated

Transfer direction of data and acknowledgment bits depends on R/W bits.

From master to slave

From slave to master

A = acknowledge (SDA low)

A = not acknowledge (SDA high)

S = Start Condition

P = Stop Condition

Slave Address

First 7 bits

R/W A

(write)

data to this slave and reads data from this slave.

Slave Address

Second byte

Data

Sr Slave Address

First 7 bits

R/W A Data A

A P

Data A/A

Data

(read)

Slave Address R/W A Data A/A

Start Condition

(write)

Direction of transfer

may change at this point

(read or write)

(n bytes + acknowledge)

Applicable Devices

61 62 62A R62 63 R63 64 64A R64 65 65A R65 66 67

PIC16C71 датащи(PDF) 97 Page - Microchip Technology

PIC16C71 датащи(HTML) 97 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL