ATtiny167-ESSZ datasheet(14/282 Pages) ATMEL

номер детали	ATtiny167-ESSZ

подробное описание детали	8-bit Microcontroller with 8K/16K Bytes In-System Programmable Flash and LIN Controller

PDF	282 Pages

Scroll/Zoom	100%

производитель	ATMEL [ATMEL Corporation]

домашняя страница	http://www.atmel.com

Logo

14 / 282 page

7728D–AVR–07/09

ATtiny87/ATtiny167

When using the SEI instruction to enable interrupts, the instruction following SEI will be exe-

cuted before any pending interrupts, as shown in this example.

2.7.2

Interrupt Response Time

The interrupt execution response for all the enabled AVR interrupts is four clock cycles mini-

mum. After four clock cycles the Program Vector address for the actual interrupt handling

routine is executed. During this four clock cycle period, the Program Counter is pushed onto

the Stack. The vector is normally a jump to the interrupt routine, and this jump takes three

clock cycles. If an interrupt occurs during execution of a multi-cycle instruction, this instruction

is completed before the interrupt is served. If an interrupt occurs when the MCU is in sleep

mode, the interrupt execution response time is increased by four clock cycles. This increase

comes in addition to the start-up time from the selected sleep mode.

A return from an interrupt handling routine takes four clock cycles. During these four clock

cycles, the Program Counter (two bytes) is popped back from the Stack, the Stack Pointer is

incremented by two, and the I-bit in SREG is set.

Assembly Code Example

sei

; set Global Interrupt Enable

sleep

; enter sleep, waiting for interrupt

; note: will enter sleep before any pending

; interrupt(s)

C Code Example

_SEI();

/* set Global Interrupt Enable */

_SLEEP(); /* enter sleep, waiting for interrupt */

/* note: will enter sleep before any pending interrupt(s) */

ATtiny167-ESSZ датащи(PDF) 14 Page - ATMEL Corporation