| поискавой системы для электроныых деталей |
|
M16C/1N датащи(PDF) 200 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M16C/1N датащи(HTML) 200 Page - Renesas Technology Corp |
|
200 / 238 page ![]() Rev.1.00 Oct 20, 2004 page 188 of 222 M16C/1N Group 19. Flash Memory Version REJ09B0007-0100Z 19.5.4 Software Commands Software commands are described below. The command code and data must be read and written in 16 bit units, to and from even addresses in the user ROM area. When writing command code, the 8 high-order bits (D15-D8) are ignored. Table 19.4 shows the list of software commands. Table 19.4 List of software commands (1) Read array This command reads the flash memory. Writing 'xxFF16' in the first bus cycle places the microcomputer in read array mode. Enter the read address in the next or subsequent bus cycles, and the content of the specified address can be read in 16 bit units. Because the microcomputer remains in read array mode until another command is written, the con- tents of multiple addresses can be read in succession. (2) Read status register This command reads the status register. Write 'xx7016' in the first bus cycle, and the status register can be read in the second bus cycle (refer to 19.5.5 Status Register). When reading the status register too, specify an even address in the user ROM area. Do not execute this command in EW1 mode. (3) Clear status register This command clears the status register to "0". Write 'xx5016' in the first bus cycle, and the FMR0 register's FMR06 to FMR07 bits and the status register's SR4 to SR5 will be cleared to "0". Software Command Program Clear status register Read array Read status register First bus cycle Second bus cycle Block erase Write Write Write Write Write Mode Read Write Write Mode X WA BA Address SRD WD xxD016 Data (D15-D0) xxFF16 xx7016 xx5016 xx4016 xx2016 Data (D15-D0) X X X WA X Address SRD: Status register data (D7-D0) WA: Write address (even address, however) WD: Write data (16 bits) BA: Uppermost block address (even address, however) X: Any even address in the user ROM area x: High-order 8 bits of command code (ignored) |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |