SH7713 datasheet(118/904 Pages) RENESAS

118 / 904 page

Section 3 DSP Operating Unit

Rev.1.50 Aug. 30, 2006 Page 78 of 860

REJ09B0288-0150

3.3

CPU Extended Instructions

3.3.1

Repeat Control Instructions

In DSP mode, a specific function is provided to execute repeat loops efficiently. By using this

function, loop programs can be executed without overhead caused by the compare and branch

instructions.

Examples of Repeat Loop Programs: Examples of repeat loop programs are shown below.

• Example 1: Repeat loop consisting of 4 or more instructions

LDRS RptStart

; Sets repeat start instruction address

to the RS register

LDRE RptStart +4

; Sets (repeat detection instruction

address + 4) to the RE register

SETRC #4

; Sets the number of repetitions (4) to

the RC[11:0] bits of the SR register

Instr0

; At least one instruction is required

from SETRC instruction to [Repeat start

instruction]

RptStart: instr1

; [Repeat start instruction]

... ...

;

... ...

;

RptDtct:

instr(N-3)

; Three instruction prior to the repeat

end instruction is regarded as repeat

detection instruction

RptEnd2:

instr(N-2)

;

RptEnd1:

instr(N-1)

;

RptEnd:

instrN

; [Repeat end instruction]

In the above program example, instructions from the RptStart address (instr1 instruction) to the

RptEnd address (instrN instruction) are repeated four times. These repeated instructions in the

program are called repeat loop. The start and end instructions of the repeat loop are called the

repeat start instruction and repeat end instruction, respectively. The CPU sequentially executes

instructions and starts repeat loop control if the CPU detects the completion of a specific

instruction. This specific instruction is called the repeat detection instruction. In a repeat loop

consisting of 4 or more instructions, an instruction three instructions prior to the repeat end

instruction is regarded as the repeat detection instruction. In a repeat loop consisting of 4 or more

instructions, the same instruction is regarded as the RptStart instruction and RptDtct instruction.

SH7713 датащи(PDF) 118 Page - Renesas Technology Corp

SH7713 датащи(HTML) 118 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL