| поискавой системы для электроныых деталей |
|
SH7713 датащи(PDF) 70 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
SH7713 датащи(HTML) 70 Page - Renesas Technology Corp |
|
70 / 904 page ![]() Section 2 CPU Rev.1.50 Aug. 30, 2006 Page 30 of 860 REJ09B0288-0150 Table 2.1 Logical Address Space Address Range Name Mode Description H'00000000 to H'7FFFFFFF P0/U0 Privileged/user mode 2-Gbyte physical space, cacheable, address translatable In user mode, only this address space can be accessed. H'80000000 to H'9FFFFFFF P1 Privileged mode 0.5-Gbyte physical space, cacheable H'A0000000 to H'BFFFFFFF P2 Privileged mode 0.5-Gbyte physical space, non-cacheable H'C0000000 to H'DFFFFFFF P3 Privileged mode 0.5-Gbyte physical space, cacheable, address translatable H'E0000000 to H'FFFFFFFF P4 Privileged mode 0.5-Gbyte control space, non-cacheable 2.2.2 External Memory Space The LSI uses 29 bits of the 32-bit logical address to access external memory. In this case, 0.5- Gbyte of external memory space can be accessed. The external memory space is managed in area units. Different types of memory can be connected to each area, as shown in figure 2.2. For details, please refer to section 12, Bus State Controller (BSC). In addition, area 1 in the external memory space is used as an on-chip I/O space where most of this LSI’s on-chip I/Os are mapped. * 1 Normally, the upper three bits of the 32-bit logical address are masked and the lower 29 bits are used for external memory addresses.* 2 For example, address H'00000100 in the P0 area, address H'80000100 in the P1 area, address H'A0000100 in the P2 area, and address H'C0000100 in the P3 area of the logical address space are mapped into address H’00000100 of area 0 in the external memory space. The P4 area in the logical address space is not mapped into the external memory address. If an address in the P4 area is accessed, an external memory cannot be accessed. Notes: 1. To access an on-chip I/O mapped into area 1 in the external memory space, access the address from the P2 area which is not cached in the logical address space. 2. If the address translation unit is enabled, arbitrary mapping in page units can be specified. For details, refer to section 5, Memory Management Unit (MMU). |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |