| поискавой системы для электроныых деталей |
|
M16C/1N датащи(PDF) 140 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M16C/1N датащи(HTML) 140 Page - Renesas Technology Corp |
|
140 / 238 page ![]() Rev.1.00 Oct 20, 2004 page 128 of 222 M16C/1N Group 14. A/D Converter REJ09B0007-0100Z External op-amp Analog input AN0 AN7 AN1 AN2 AN3 AN4 AN5 AN6 ANEX1 ANEX0 Resistance ladder Successive conversion register Comparator AN11 AN8 AN9 AN10 ADGSEL0=1 ADGSEL0=0 Figure 14.6 Example of external op-amp connection mode 14.3 Sample and Hold Sample and hold is selected by setting bit 0 of the A/D control register 2 (address 00D416) to "1". When sample and hold is selected, the rate of conversion of each pin increases. As a result, a 28 ØAD cycle is achieved with 8-bit resolution and 33 ØAD with 10-bit resolution. Sample and hold can be selected in all modes. However, in all modes, be sure to specify before starting A/D conversion whether sample and hold is to be used. 14.4 Extended Analog Input Pins In one-shot mode and repeat mode, the input via the extended analog input pins ANEX0 and ANEX1 can also be converted from analog to digital. When bit 6 of the A/D control register 1 (address 00D716) is "1" and bit 7 is "0", input via ANEX0 is converted from analog to digital. When bit 6 of the A/D control register 1 (address 00D716) is "0" and bit 7 is "1", input via ANEX1 is converted from analog to digital. 14.5 External Operation Amp Connection Mode In this mode, multiple external analog inputs via the extended analog input pins, ANEX0 and ANEX1, can be amplified together by just one operation amp and used as the input for A/D conversion. When bit 6 of the A/D control register 1 (address 00D716) is "1" and bit 7 is "1", input via AN0 to AN11 is output from ANEX0. The input from ANEX1 is converted from analog to digital and the result stored in the A/D register. The speed of A/D conversion depends on the response of the external operation amp. Do not connect the ANEX0 and ANEX1 pins directly. Figure 14.6 is an example of how to connect the pins in external operation amp mode. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |