AD9927BBCZ datasheet(56/100 Pages) AD

56 / 100 page

AD9927

Rev. 0 | Page 56 of 100

Read After Exposure

To read the CCD data after exposure, the SG should resume

normal activity while the SUBCK remains null. By default, the

AD9927 generates the VSG pulses in every field. When only a

single exposure and a single frame read is desired, such as is the

case in the preview mode, the VSG and SUBCK pulses can

operate in every field.

Other applications require that a greater number of frames are

read, in which case SUBCK must be masked until the readout is

finished. The SUBCKMASK_NUM register specifies the total

number of fields (exposure and read) to mask SUBCK. A 2-field

CCD frame read mode typically requires two additional fields of

SUBCK masking (SUBCKMASK_NUM = 2). A 3-field, 6-phase

CCD requires three additional fields of SUBCK masking after

the read begins (SUBCKMASK_NUM = 3).

Note that the SUBCKMASK_SKIP1 register setting allows

SUBCK pulses at the beginning of the field of exposure.

Table 40. SUBCK and Exposure/Read Register Parameters

Length

Range

Description

SGMASK_NUM

13b

0 to 8191 no. of fields

Exposure duration (number of fields to suppress VSG) for LS operation.

SUBCKMASK_NUM

13b

0 to 8191 no. of fields

Exposure plus readout duration (number of fields to suppress SUBCK) for LS.

SUBCKMASK_SKIP1

On/off

Suppress SG/SUBCK masks for one field (default = 0). Typically set to 1.

SUBCKSTARTLINE1

13b

0, 2 to 8191 line location

Line location to start the SUBCK pulses, relative to SGLINE location.

A value of 1 is invalid. See the SUBCK Start Line section.

SUBCKNUM1

13b

1 to 8191 no. of pulses

Total number of SUBCKs per field, at 1 pulse per line. Must be <VDLEN.

SG_SUPPRESS1

On/off

Suppress the SG and allow SUBCK to finish at SUBCKNUM.

SUBCK_TOG1

13b

0 to 8191 pixel locations

SUBCK Toggle Position 1.

SUBCK_TOG2

13b

0 to 8191 pixel locations

SUBCK Toggle Position 2.

SUBCK_POL

Low/high

SUBCK start polarity.

SUBCKHP_TOG1

13b

0 to 8191 pixel locations

Hi-precision SUBCK Toggle Position 1. Selectable as SG or VD updated.

SUBCKHP_TOG2

13b

0 to 8191 pixel locations

Hi-precision SUBCK Toggle Position 2. Selectable as SG or VD updated.

1 Register is not VD updated but is updated at the start of the line after the sensor gate line.

AD9927BBCZ датащи(PDF) 56 Page - Analog Devices

AD9927BBCZ датащи(HTML) 56 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

датащи скачать

ссылки URL