LP87702 datasheet(5/98 Pages) TI

5 / 98 page

6 Specifications

6.1 Absolute Maximum Ratings

Over operating free-air temperature range (unless otherwise noted)(1) (2)

MIN

MAX

UNIT

VIN_B0,

VIN_B1, SW_BST,

VANA

Voltage on input power connections

–0.3

SW_B0, SW_B1

Voltage on buck switch nodes

–0.3

(VIN_Bx + 0.3 V) with

6-V maximum

FB_B0, FB_B1

Voltage on buck voltage sense nodes

–0.3

(VANA + 0.3 V) with

6-V maximum

VOUT_BST

Voltage on boost output

–0.3

SCL (EN2), SDA (EN3),

VMON1, VMON2

Voltage on voltage monitoring pins

–0.3

(VANA + 0.3 V) with

6-V maximum

NRST, EN1, nINT

Voltage on logic pins (input or output pins)

–0.3

PG0, PG1 (GPO1),

GPO0, CLKIN (GPO2),

WDI, WD_RESET

Voltage on logic pins (input or output pins)

–0.3

(VANA + 0.3 V) with

6-V maximum

TJ-MAX

Junction temperature

−40

150

°C

Tstg

Storage temperature

–65

150

°C

Maximum lead temperature (soldering, 10 sec.)

260

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress

ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under

Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device

reliability.

(2)

All voltage values are with respect to network ground.

6.2 ESD Ratings

VALUE

UNIT

V(ESD)

Electrostatic discharge

Human-body model (HBM), per AEC Q100-002(1)

±2000

Charged-device model (CDM), per AEC

Q100-011

All pins

±500

Corner pins (1, 8, 9, 16, 17,

24, 25, 32)

±750

(1)

AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

INPUT VOLTAGE

VIN_B0, VIN_B1, SW_BST, VANA

Voltage on input power connections

2.8

5.5

VMON1, VMON2

Voltage on voltage monitoring pins

5.5

NRST, EN1, EN2, EN3, nINT

Voltage on logic pins (input or output pins)

5.5

PG0, PG1 (GPO1), GPO0, CLKIN

(GPO2), WDI, WD_RESET

Voltage on logic pins (input or output pins)

VANA

SCL, SDA

Voltage on I2C interface, Standard (100 kHz), Fast

(400 kHz), Fast+ (1 MHz), and High-Speed (3.4

MHz) Modes

1.95

Voltage on I2C interface, Standard (100 kHz), Fast

(400 kHz), and Fast+ (1 MHz) Modes

0 VANA with 3.6-V

maximum

TEMPERATURE

www.ti.com

LP87702

SNVSBU3 – MARCH 2021

Submit Document Feedback

Product Folder Links: LP87702

LP87702 датащи(PDF) 5 Page - Texas Instruments

LP87702 датащи(HTML) 5 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98

датащи скачать

ссылки URL