PIC18F23K22-ESLASHML datasheet(89/496 Pages) MICROCHIP

89 / 496 page

 2010 Microchip Technology Inc.

Preliminary

DS41412C-page 89

PIC18(L)F2X/4XK22

5.3.5

STATUS REGISTER

The STATUS register, shown in Register 5-2, contains

the arithmetic status of the ALU. As with any other SFR,

it can be the operand for any instruction.

If the STATUS register is the destination for an instruc-

tion that affects the Z, DC, C, OV or N bits, the results

of the instruction are not written; instead, the STATUS

formed. Therefore, the result of an instruction with the

STATUS register as its destination may be different

than intended. As an example, CLRF STATUS will set

the Z bit and leave the remaining Status bits

unchanged (‘000u u1uu’).

It is recommended that only BCF, BSF, SWAPF, MOVFF

and MOVWF instructions are used to alter the STATUS

C, DC, OV or N bits in the STATUS register.

For other instructions that do not affect Status bits, see

the instruction set summaries in Table 25.2 and

Table 25-3.

Note:

The C and DC bits operate as the borrow

and digit borrow bits, respectively, in

subtraction.

STATUS: STATUS REGISTER

U-0

R/W-x

—

NOV

DC(1)

C(1)

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

bit 7-5

Unimplemented: Read as ‘0’

bit 4

N: Negative bit

This bit is used for signed arithmetic (two’s complement). It indicates whether the result was negative

(ALU MSB = 1).

1 = Result was negative

0 = Result was positive

bit 3

OV: Overflow bit

This bit is used for signed arithmetic (two’s complement). It indicates an overflow of the 7-bit magni-

tude which causes the sign bit (bit 7 of the result) to change state.

1 = Overflow occurred for signed arithmetic (in this arithmetic operation)

0 = No overflow occurred

bit 2

Z: Zero bit

1 = The result of an arithmetic or logic operation is zero

0 = The result of an arithmetic or logic operation is not zero

bit 1

DC: Digit Carry/Borrow bit (ADDWF, ADDLW,SUBLW,SUBWF instructions)(1)

1 = A carry-out from the 4th low-order bit of the result occurred

0 = No carry-out from the 4th low-order bit of the result

bit 0

C: Carry/Borrow bit (ADDWF, ADDLW, SUBLW, SUBWF instructions)(1)

1 = A carry-out from the Most Significant bit of the result occurred

0 = No carry-out from the Most Significant bit of the result occurred

Note 1:

For Borrow, the polarity is reversed. A subtraction is executed by adding the two’s complement of the

second operand. For rotate (RRF, RLF) instructions, this bit is loaded with either the high-order or low-order

bit of the source register.

PIC18F23K22-E/ML датащи(PDF) 89 Page - Microchip Technology

PIC18F23K22-E/ML датащи(HTML) 89 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL