| поискавой системы для электроныых деталей |
|
ATtiny43U датащи(PDF) 150 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATtiny43U датащи(HTML) 150 Page - ATMEL Corporation |
|
150 / 182 page ![]() 150 8048B–AVR–03/09 ATtiny43U 1. A: Load Command “0010 0000”. 2. C: Load Data Low Byte. Bit n = “0” programs the Lock bit. If LB mode 3 is programmed (LB1 and LB2 is programmed), it is not possible to program the Boot Lock bits by any External Programming mode. 3. Give WR a negative pulse and wait for RDY/BSY to go high. The Lock bits can only be cleared by executing Chip Erase. 19.6.12 Reading the Fuse and Lock Bits The algorithm for reading the Fuse and Lock bits is as follows (refer to “Programming the Flash” on page 145 for details on Command loading): 1. A: Load Command “0000 0100”. 2. Set OE to “0”, BS2 to “0” and BS1 to “0”. The status of the Fuse Low bits can now be read at DATA (“0” means programmed). 3. Set OE to “0”, BS2 to “1” and BS1 to “1”. The status of the Fuse High bits can now be read at DATA (“0” means programmed). 4. Set OE to “0”, BS2 to “1”, and BS1 to “0”. The status of the Extended Fuse bits can now be read at DATA (“0” means programmed). 5. Set OE to “0”, BS2 to “0” and BS1 to “1”. The status of the Lock bits can now be read at DATA (“0” means programmed). 6. Set OE to “1”. Figure 19-6. Mapping Between BS1, BS2 and the Fuse and Lock Bits During Read 19.6.13 Reading the Signature Bytes The algorithm for reading the Signature bytes is as follows (refer to “Programming the Flash” on page 145 for details on Command and Address loading): 1. A: Load Command “0000 1000”. 2. B: Load Address Low Byte (0x00 - 0x02). 3. Set OE to “0”, and BS to “0”. The selected Signature byte can now be read at DATA. 4. Set OE to “1”. 19.6.14 Reading the Calibration Byte The algorithm for reading the Calibration byte is as follows (refer to “Programming the Flash” on page 145 for details on Command and Address loading): Lock Bits 0 1 BS2 Fuse High Byte 0 1 BS1 DATA Fuse Low Byte 0 1 BS2 Extended Fuse Byte |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |