 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
CS43131 датащи(PDF) 94 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS43131 датащи(HTML) 94 Page - Cirrus Logic |
|
|
94 / 156 page  94 DS1155F1 CS43131 5.13 Example Sequences 5.13.10 Switching MCLK Frequency Ex. 5-16 shows steps necessary to switch the MCLK frequency in order to play audio at a different sample rate that is no longer an integer divide of current MCLK. It makes the following assumptions: • The CS43131 is already powered up and out of reset. • MCLK_INT is 22.5792 MHz, and the sample rate is an integer divide of MCLK. • ASP is used for audio delivery and PDN_HP = 0. 5.13.11 Headphone Detection Ex. 5-17 shows steps necessary to detect the presence of a headphone. It makes the following assumptions: • The CS43131 is already powered up and out of reset. • The HP Detect register is not configured. Example 5-16. Sequence for Switching MCLK Frequency STEP TASK REGISTER/BIT FIELDS VALUE DESCRIPTION 1 Power down PCM Refer to Ex. 5-3 for PCM power-down sequence 2 Switch MCLK Source to RCO 3 Set MCLK Source to RCO System Clocking Control 1. 0x10006 0x06 Reserved MCLK_INT MCLK_SRC_SEL 0000 0 1 10 Frequency of MCLK_INT is don't care MCLK source set to RCO 4 Wait for 150 µs. 5 Switch to a different MCLK Frequency. Assuming new MCLK frequency is 24.576MHz. 6 Change MCLK_INT frequency to 24.576 MHz System Clocking Control 1. 0x10006 0x02 Reserved MCLK_INT MCLK_SRC_SEL 0000 0 0 10 MCLK_INT frequency set to 24.576 MHz 7 Configure ASP for appropriate sample rate, bit size and clock mode. Unmute PCM CHA and CHB outputs. Enable appropriate interrupts 8 Switch MCLK source to direct MCLK mode System Clocking Control 1. 0x10006 0x0 Reserved MCLK_INT MCLK_SRC_SEL 0000 0 0 00 MCLK_INT frequency set to 24.576 MHz MCLK source set to direct MCLK mode 9 Wait at least 150 µs. 10 Power up ASP Power Down Control. 0x20000 data(0x20000) AND (0xBF) PDN_XSP PDN_ASP PDN_DSDIF PDN_HP PDN_XTAL PDN_PLL PDN_CLKOUT Reserved x 0 x 1 0 x x 0 Enable ASP data pins XTAL is already enabled 11 Power up HP Refer to Ex. 5-5 for PCM power-up sequence Example 5-17. Sequence for Headphone Detection STEP TASK REGISTER/BIT FIELDS VALUE DESCRIPTION 1 Read Interrupt Status 1 register (0xF0000) to clear any sticky bits. 2 Read HP Status register (0xD0001) to clear any sticky bits. 3 Enable HPDETECT interrupts Interrupt Mask 1. 0xF0010 data (0xF0010) AND 0x9F DAC_OVFL_INT_MASK HPDETECT_PLUG_INT_MASK HPDETECT_UNPLUG_INT_MASK XTAL_READY_INT_MASK XTAL_ERROR_INT_MASK PLL_READY_INT_MASK PLL_ERROR_INT_MASK PDN_DONE_INT_MASK x 0 0 x x x x x Enable HPDETECT interrupts 4 Configure HP Detect parameters HP Detect. 0xD0000 0x04 HPDETECT_CTRL HPDETECT_INV HPDETECT_RISE_DBC_TIME HPDETECT_FALL_DBC_TIME Reserved 00 0 0 0 10 0 Rising edge debounce time set to 0 ms Falling edge debounce time set to 500 ms |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
