AD9523-1SLASHPCBZ datasheet(1/60 Pages) AD

номер детали	AD9523-1/PCBZ

подробное описание детали	Low Jitter Clock Generator

PDF	60 Pages

Scroll/Zoom	100%

производитель	AD [Analog Devices]

домашняя страница	http://www.analog.com

Logo

1 / 60 page

Low Jitter Clock Generator with

14 LVPECL/LVDS/HSTL/29 LVCMOS Outputs

AD9523-1

Rev. B

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringements of patents or other

rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

www.analog.com

Fax: 781.461.3113

FEATURES

Output frequency: <1 MHz to 1 GHz

Start-up frequency accuracy: <±100 ppm (determined by

VCXO reference accuracy)

Zero delay operation

Input-to-output edge timing: <150 ps

Dual VCO dividers

14 outputs: configurable LVPECL, LVDS, HSTL, and LVCMOS

14 dedicated output dividers with jitter-free adjustable delay

Adjustable delay: 63 resolution steps of ½ period of VCO

output divider

Output-to-output skew: <50 ps

Duty cycle correction for odd divider settings

Automatic synchronization of all outputs on power-up

Absolute output jitter: <150 fs at 122.88 MHz

Integration range: 12 kHz to 20 MHz

Broadband timing jitter: 124 fs

Digital lock detect

Nonvolatile EEPROM stores configuration settings

SPI- and I²C-compatible serial control port

Dual PLL architecture

PLL1

Low bandwidth for reference input clock cleanup with

external VCXO

Phase detector rate of 300 kHz to 75 MHz

Redundant reference inputs

Auto and manual reference switchover modes

Revertive and nonrevertive switching

Loss of reference detection with holdover mode

Low noise LVCMOS output from VCXO used for RF/IF

synthesizers

PLL2

Phase detector rate of up to 250 MHz

Integrated low noise VCO

APPLICATIONS

LTE and multicarrier GSM base stations

Wireless and broadband infrastructure

Medical instrumentation

Clocking high speed ADCs, DACs, DDSs, DDCs, DUCs, MxFEs

Low jitter, low phase noise clock distribution

Clock generation and translation for SONET, 10Ge, 10G FC,

and other 10 Gbps protocols

Forward error correction (G.710)

High performance wireless transceivers

ATE and high performance instrumentation

FUNCTIONAL BLOCK DIAGRAM

PLL1

REFA,

REFA

REFB,

REFB

REF_TEST

SDIO/SDA

ZD_IN, ZD_IN

CONTROL

INTERFACE

(SPI AND I2C)

EEPROM

PLL2

ZERO

DELAY

AD9523-1

14-CLOCK

DISTRIBUTION

SCLK/SCL

SDO

OSC_IN, OSC_IN

DIVIDE-BY-

3, 4, 5

DIVIDE-BY-

3, 4, 5

8 OUTPUTS

OUT0,

OUT0

6 OUTPUTS

OUT3,

OUT3

OUT10,

OUT10

OUT13,

OUT13

OUT4,

OUT4

OUT9,

OUT9

Figure 1.

GENERAL DESCRIPTION

The AD9523-1 provides a low power, multi-output, clock

distribution function with low jitter performance, along with an

on-chip PLL and VCO with two VCO dividers. The on-chip VCO

tunes from 2.94 GHz to 3.1 GHz.

The AD9523-1 is defined to support the clock requirements for

long term evolution (LTE) and multicarrier GSM base station

designs. It relies on an external VCXO to provide the reference

jitter cleanup to achieve the restrictive low phase noise require-

ments necessary for acceptable data converter SNR performance.

The input receivers, oscillator, and zero delay receiver provide

both single-ended and differential operation. When connected

to a recovered system reference clock and a VCXO, the device

generates 14 low noise outputs with a range of 1 MHz to 1 GHz,

and one dedicated buffered output from the input PLL (PLL1).

The frequency and phase of one clock output relative to another

clock output can be varied by means of a divider phase select

function that serves as a jitter-free, coarse timing adjustment

in increments that are equal to half the period of the signal

coming out of the VCO.

An in-package EEPROM can be programmed through the serial

interface to store user-defined register settings for power-up

and chip reset.

Аналогичный номер детали - AD9523-1/PCBZ

производитель	номер детали	датащи	подробное описание детали
Analog Devices	AD9523-1	1Mb / 63P	Low Jitter Clock Generator 9/15-Rev. B to Rev. C
	AD9523-1BCPZ	1Mb / 63P	Low Jitter Clock Generator 9/15-Rev. B to Rev. C
	AD9523-1BCPZ-REEL7	1Mb / 63P	Low Jitter Clock Generator 9/15-Rev. B to Rev. C

More results

Аналогичное описание - AD9523-1/PCBZ

производитель	номер детали	датащи	подробное описание детали
Maxim Integrated Produc...	MAX3670	339Kb / 13P	Low-Jitter 155MHz/622MHz Clock Generator 19-2166; Rev 0; 9/01
Maxim Integrated Produc...	MAX3672	493Kb / 12P	Low-Jitter 155MHz/622MHz Clock Generator 19-2697; Rev 0; 12/02
Analog Devices	AD9540	485Kb / 32P	655 MHz Low Jitter Clock Generator 7/04-Revision 0
Maxim Integrated Produc...	MAX3670	202Kb / 12P	Low-Jitter 155MHz/622MHz Clock Generator Rev 2; 9/09
Analog Devices	AD9540	846Kb / 32P	655 MHz Low Jitter Clock Generator REV. A
ON Semiconductor	P1P8160A	129Kb / 6P	Low Jitter Clock Generator October, 2010 ??Rev. 2
Texas Instruments	LMK03328	2Mb / 153P	Ultra-Low Jitter Clock Generator
Pericom Semiconductor C...	PI6CXG06F62A	580Kb / 2P	FlexOut Ultra Low Jitter Clock Generator
Analog Devices	AD9523-1	1Mb / 63P	Low Jitter Clock Generator 9/15-Rev. B to Rev. C
Analog Devices	AD9540	588Kb / 32P	655 MHz Low Jitter Clock Generator 4/2018-Rev. B to Rev. C

More results

AD9523-1/PCBZ датащи(PDF) 1 Page - Analog Devices

AD9523-1/PCBZ датащи(HTML) 1 Page - Analog Devices

Аналогичный номер детали - AD9523-1/PCBZ

Аналогичное описание - AD9523-1/PCBZ

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

датащи скачать

ссылки URL