| поискавой системы для электроныых деталей |
|
LXT971ABC датащи(PDF) 77 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
LXT971ABC датащи(HTML) 77 Page - Intel Corporation |
|
77 / 90 page ![]() LXT971A 3.3V Dual-Speed Fast Ethernet Transceiver Datasheet 77 Document #: 249414 Revision #: 002 Rev. Date: August 7, 2002 Table 47. Auto-Negotiation Advertisement Register (Address 4) Bit Name Description Type 1 Default 4.15 Next Page 1 = Port has ability to send multiple pages. 0 = Port has no ability to send multiple pages. R/W 0 4.14 Reserved Ignore. RO 0 4.13 Remote Fault 1 = Remote fault. 0 = No remote fault. R/W 0 4.12 Reserved Ignore. R/W 0 4.11 Asymmetric Pause Pause operation defined in Clause 40 and 27. R/W 0 4.10 Pause 1 = Pause operation enabled for full-duplex links. 0 = Pause operation disabled. R/W Note 2 4.9 100BASE-T4 1 = 100BASE-T4 capability is available. 0 = 100BASE-T4 capability is not available. (The LXT971A does not support 100BASE-T4 but allows this bit to be set to advertise in the auto- negotiation sequence for 100BASE-T4 operation. An external 100BASE-T4 transceiver could be switched in if this capability is desired.) R/W 0 4.8 100BASE-TX full-duplex 1 = Port is 100BASE-TX full-duplex capable. 0 = Port is not 100BASE-TX full-duplex capable. R/W Note 3 4.7 100BASE-TX 1 = Port is 100BASE-TX capable. 0 = Port is not 100BASE-TX capable. R/W Note 3 4.6 10BASE-T full-duplex 1 = Port is 10BASE-T full-duplex capable. 0 = Port is not 10BASE-T full-duplex capable. R/W Note 3 4.5 10BASE-T 1 = Port is 10BASE-T capable. 0 = Port is not 10BASE-T capable. R/W Note 3 4.4:0 Selector Field, S<4:0> <00001> = IEEE 802.3. <00010> = IEEE 802.9 ISLAN-16T. <00000> = Reserved for future auto-negotiation development. <11111> = Reserved for future auto-negotiation development. Unspecified or reserved combinations should not be transmitted. R/W 00001 1. R/W = Read/Write RO = Read Only 2. The default setting of Register bit 4.10 (PAUSE) is determined by pin 33/H8 at reset. 3. Default values of Register bits 4.5, 4.6, 4.7, and 4.8 are determined by LED/CFGn pins at reset. Refer to Table 9 for details. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |