| поискавой системы для электроныых деталей |
|
PC97307 датащи(PDF) 156 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
PC97307 датащи(HTML) 156 Page - National Semiconductor (TI) |
|
156 / 218 page ![]() 156 UART1 and UART2 (with IR) (Logical Devices 5 and 6) www.national.com FIGURE 7-26. TXFLV Register Bitmap Bits 5-0 - Number of Bytes in TX_FIFO (TFL(5-0)) These bits specify the number of bytes in the TX_FIFO. Bits 7,6 - Reserved Read/Write 0’s. 7.12.7 RX_FIFO Current Level Register (RXFLV), IrDA or Consumer-IR Modes, Bank 2, Offset 07h This read-only register returns the number of bytes in the RX_FIFO. It can be used for software debugging. FIGURE 7-27. RXFLV Register Bitmap Bits 5-0 - Number of Bytes in RX_FIFO (RFL(5-0)) These bits specify the number of bytes in the RX_FIFO. Bits 7,6 - Reserved Read/Write 0’s. Note: The contents of TXFLV and RXFLV are not frozen during CPU reads. Therefore, invalid data could be re- turned if the CPU reads these registers during normal transmitter and receiver operation. To obtain correct da- ta, the software should perform three consecutive reads and then take the data from the second read, if first and second read yield the same result, or from the third read, if first and second read yield different results. 76543210 Reset Required 0 0 0 0 0 0 0 0 0 0 Current Level Register (TXFLV) Bank 2, TX_FIFO TFL2 TFL4 TFL5 Reserved Reserved TFL0 TFL1 TFL3 Extended Modes Offset 06h 76543210 Reset Required 0 0 0 0 0 0 0 0 0 0 Current Level Register (RXFLV) Bank 2, RFL2 RFL4 Reserved Reserved RFL0 RFL1 RFL3 Extended Modes RFL5 Offset 07h 7.13 BANK 3 – MODULE REVISION ID AND SHADOW REGISTERS Bank 3 contains the Module Revision ID register which identifies the revision of the module, shadow registers for monitoring various registers whose contents are modified by being read, and status and control registers for handling the flow control. TABLE 7-19. Bank 3 Register Set 7.13.1 Module Revision ID Register (MRID), Bank 3, Offset 00h This read-only register identifies the revision of the module. When read, it returns the module ID and revision level. This module returns the code 2xh, where x indicates the revision number. FIGURE 7-28. MRID Register Bitmap Bits 3-0 - Revision ID (MID3-0) The value in these bits identifies the revision level. Bits 7-4 - Module ID (MID7-4) The value in these bits identifies the module type. Offset Register Name Description 00h MRID Module Revision ID Register 01h SH_LCR Shadow of LCR Register (Read Only) 02h SH_FCR Shadow of FIFO Control Register (Read Only) 03h LCR/ BSR Link Control Register/ Bank Select Register 04h-07h Reserved 76543210 Reset Required x x x x 0 1 0 0 Module Revision ID (MRID) Bank 3, Offset 00h Register Revision ID(RID 3-0) Module ID(MID 7-4) |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |