| поискавой системы для электроныых деталей |
|
910GL датащи(PDF) 140 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
910GL датащи(HTML) 140 Page - Intel Corporation |
|
140 / 426 page ![]() Host-PCI Express* Bridge Registers (D1:F0) (Intel® 82915G/82915P/82915PL Only) R 140 Datasheet 8.1.18 PMLIMIT1—Prefetchable Memory Limit Address (D1:F0) PCI Device: 1 Address Offset: 26h Default Value: 0000h Access: RO, R/W Size: 16 bits This register, in conjunction with the corresponding Upper Limit Address register, controls the processor-to-PCI Express Graphics prefetchable memory access routing based on the following formula: PREFETCHABLE_MEMORY_BASE ≤ address ≤ PREFETCHABLE_MEMORY_LIMIT The upper 12 bits of this register are read/write and correspond to address bits A[31:20] of the 40- bit address. The lower 8 bits of the Upper Limit Address register are read/write and correspond to address bits A[39:32] of the 40-bit address. The configuration software must initialize this register. For the purpose of address decode, address bits A[19:0] are assumed to be FFFFFh. Thus, the top of the defined memory address range will be at the top of a 1-MB aligned memory block. Note that prefetchable memory range is supported to allow segregation by the configuration software between the memory ranges that must be defined as UC and the ones that can be designated as a USWC (i.e., prefetchable) from the processor perspective. Bit Access & Default Description 15:4 R/W 000h Prefetchable Memory Address Limit (PMLIMIT): This field corresponds to A[31:20] of the upper limit of the address range passed to PCI Express*. 3:0 RO 0h 64-bit Address Support: This field indicates the bridge supports only 32 bit addresses. 8.1.19 CAPPTR1—Capabilities Pointer (D1:F0) PCI Device: 1 Address Offset: 34h Default Value: 88h Access: RO Size: 8 bits The capabilities pointer provides the address offset to the location of the first entry in this device’s linked list of capabilities. Bit Access & Default Description 7:0 RO 88h First Capability (CAPPTR1): The first capability in the list is the Subsystem ID and Subsystem Vendor ID Capability. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |