MNSC140CORE datasheet(18/88 Pages) FREESCALE

18 / 88 page

MSC8122 Technical Data, Rev. 13

1-8

Freescale Semiconductor

Signals/Connections

HD60

D60

ETHCOL

Reserved

Input/ Output

Input

Host Data Bus 60

Bit 60 of the DSI data bus.

System Bus Data 60

For write transactions, the bus master drives valid data on this line. For read transactions, the slave drives

valid data on this bus.

Ethernet Collision

In MII mode only, indicates that a collision was detected.

In RMII mode, this pin is reserved and can be left unconnected.

HD[61–63]

D[61–63]

Reserved

Input/ Output

Input

Host Data Bus 61–63

Bits 61–63 of the DSI data bus.

System Bus Data 61–63

For write transactions, the bus master drives valid data on this bus. For read transactions, the slave drives

valid data on this bus.

If the Ethernet port is enabled and multiplexed with the DSI/System bus, these pins are reserved and can

be left unconnected.

HCID[0–2]

Input

Host Chip ID 0–2

With HCID3, carries the chip ID of the DSI. The DSI is accessed only if HCS is asserted and HCID[0–3]

matches the Chip_ID, or if HBCS is asserted.

HCID3

HA8

Input

Host Chip ID 3

With HCI[0–2], carries the chip ID of the DSI. The DSI is accessed only if HCS is asserted and HCID[0–3]

matches the Chip_ID, or if HBCS is asserted.

Host Bus Address 8

Used by an external host to access the internal address space.

HA[11–29]

Input

Host Bus Address 11–29

Used by external host to access the internal address space.

HWBS[0–3]

HDBS[0–3]

HWBE[0–3]

HDBE[0–3]

Input

Host Write Byte Strobes (In Asynchronous dual mode)

One bit per byte is used as a strobe for host write accesses.

Host Data Byte Strobe (in Asynchronous single mode)

One bit per byte is used as a strobe for host read or write accesses

Host Write Byte Enable (In Synchronous dual mode)

One bit per byte is used to indicate a valid data byte for host read or write accesses.

Host Data Byte Enable (in Synchronous single mode)

One bit per byte is used as a strobe enable for host write accesses

Table 1-5.

DSI, System Bus, Ethernet, and Interrupt Signals (Continued)

Signal Name

Type

Description

MNSC140CORE датащи(PDF) 18 Page - Freescale Semiconductor, Inc

MNSC140CORE датащи(HTML) 18 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

датащи скачать

ссылки URL