AD4697 datasheet(103/107 Pages) AD

103 / 107 page

Data Sheet

AD4697/AD4698

analog.com

Rev. 0 | 103 of 107

Table 51. Bit Descriptions for GP_MODE

Bits

Bit Name

Description

Reset

Access

0x2: (WLCSP option): quad-SDO mode enabled.

0x3: single-SDO mode enabled.

BUSY_GP_EN

Busy Indicator on General-Purpose Pin Enable Bit. Enables or disables the busy indicator on the general-purpose

pin selected by the BUSY_GP_SEL bit if all higher priority functions are disabled (see the General-Purpose Pins

section).

0x0

R/W

0: busy indicator on the general-purpose pin function disabled.

1: busy indicator on the general-purpose pin function enabled.

ALERT_GP_EN

Alert Indicator on General-Purpose Pin Enable Bit. Enables or disables the alert indicator on the general-purpose

pin selected by the ALERT_GP_SEL bit if all higher priority functions are disabled (see the General-Purpose Pins

section).

0x0

R/W

0: alert indicator on the general-purpose pin function disabled.

1: alert indicator on the general-purpose pin function enabled.

GPIO State Register

Address: 0x0028, Reset: 0x00, Name: GPIO_STATE

Table 52. Bit Descriptions for GPIO_STATE

Bits

Bit Name

Description

Reset

Access

[7:4]

GPI_READ

GPI State Field. Displays the state of each general-purpose pin configured as a general-purpose input (see the GPIO

section). GPI_READ[3:1] always return 0 on the LFCSP option.

0x0

[3:0]

GPO_WRITE

GPO State Control. Sets the state of each general-purpose pin configured as a general-purpose output (see the GPIO

section). GPO_WRITE[3:1] are only active on the WLCSP option. Setting these bits on the LFCSP option has no effect.

0x0

R/W

Temperature Sensor Control Register

Address: 0x0029, Reset: 0x00, Name: TEMP_CTRL

Table 53. Bit Descriptions for TEMP_CTRL

Bits

Bit Name

Description

Reset

Access

[7:1]

RESERVED

Reserved.

0x0

TEMP_EN

Temperature Sensor Enable Bit. This bit enables or disables the temperature sensor in the channel sequence when the

standard sequencer or advanced sequencer is enabled (see the Temperature Sensor section).

0x0

R/W

0: temperature sensor not included in the channel sequence.

1: temperature sensor included in the channel sequence.

AD4697 датащи(PDF) 103 Page - Analog Devices

AD4697 датащи(HTML) 103 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL