| поискавой системы для электроныых деталей |
|
IMX6SDLCEC датащи(PDF) 26 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
IMX6SDLCEC датащи(HTML) 26 Page - NXP Semiconductors |
|
26 / 169 page ![]() i.MX 6Solo/6DualLite Applications Processors for Consumer Products, Rev. 9, 11/2018 26 NXP Semiconductors Electrical Characteristics 4.1.3 Operating Ranges Table 8 provides the operating ranges of the i.MX 6Solo/6DualLite processors. For details on the chip's power structure, see the “Power Management Unit (PMU)” chapter of the i.MX 6Solo/6DualLite Reference Manual (IMX6SDLRM). Table 8. Operating Ranges Parameter Description Symbol Min Typ Max1 Unit Comment2 Run mode: LDO enabled VDD_ARM_IN 1.3503 — 1.5 V LDO Output Set Point (VDD_ARM_CAP) = 1.225 V minimum for operation up to 996MHz. 1.2753 — 1.5 V LDO Output Set Point (VDD_ARM_CAP) = 1.150 V minimum for operation up to 792MHz. 1.253 — 1.5 V LDO Output Set Point (VDD_ARM_CAP) = 1.125 V minimum for operation up to 396MHz. VDD_SOC_IN 1.2753,4 — 1.5 V VPU ≤ 328 MHz, VDD_SOC and VDD_PU LDO outputs (VDD_SOC_CAP and VDD_PU_CAP) = 1.225 V6 maximum and 1.15 V minimum. Run mode: LDO bypassed VDD_ARM_IN 1.250 — 1.3 V LDO bypassed for operation up to 996 MHz 1.150 — 1.3 V LDO bypassed for operation up to 792 MHz 1.125 — 1.3 V LDO bypassed for operation up to 396 MHz VDD_SOC_IN 1.1505 —1.216 V LDO bypassed for operation VPU ≤ 328 MHz Standby/DSM mode VDD_ARM_IN 0.9 — 1.3 V Refer to Table 11, "Stop Mode Current and Power Consumption," on page 30. VDD_SOC_IN 0.9 — 1.2256 V— VDD_HIGH internal regulator VDD_HIGH_IN 2.8 — 3.3 V Must match the range of voltages that the rechargeable backup battery supports. Backup battery supply range VDD_SNVS_IN7 2.9 — 3.3 V Should be supplied from the same supply as VDD_HIGH_IN if the system does not require keeping real time and other data on OFF state. USB supply voltages USB_OTG_VBUS 4.4 — 5.25 V — USB_H1_VBUS 4.4 — 5.25 V — DDR I/O supply voltage NVCC_DRAM 1.14 1.2 1.3 V LPDDR2 1.425 1.5 1.575 V DDR3 1.283 1.35 1.45 V DDR3L Supply for RGMII I/O power group8 NVCC_RGMII 1.15 — 2.625 V 1.15 V–1.30 V in HSIC 1.2 V mode 1.43 V–1.58 V in RGMII 1.5 V mode 1.70 V–1.90 V in RGMII 1.8 V mode 2.25 V–2.625 V in RGMII 2.5 V mode |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |