TMS570LS1114 datasheet(2/169 Pages) TI1

2 / 169 page

TMS570LS1114

SPNS188B – OCTOBER 2012 – REVISED FEBRUARY 2015

www.ti.com

1.2

Applications

•

Braking Systems (ABS and ESC)

•

Active Driver Assistance Systems

•

Electric Power Steering (EPS)

•

Aerospace and Avionics

•

HEV and EV Inverter Systems

•

Railway Communications

•

Battery Management Systems

•

Off-road Vehicles

1.3

Description

The TMS570LS1114 device is a high-performance automotive-grade microcontroller family for safety

systems. The safety architecture includes dual CPUs in lockstep, CPU and memory BIST logic, ECC on

both the flash and the data SRAM, parity on peripheral memories, and loopback capability on peripheral

I/Os.

The TMS570LS1114 device integrates the ARM Cortex-R4F floating-point CPU which offers an efficient

1.66 DMIPS/MHz, and has configurations which can run up to 180 MHz providing up to 298 DMIPS. The

device supports the word-invariant big-endian [BE32] format.

The TMS570LS1114 device has 1MB of integrated flash and 128KB of data RAM with single-bit error

correction and double-bit error detection. The flash memory on this device is a nonvolatile, electrically

erasable and programmable memory, implemented with a 64-bit-wide data bus interface. The flash

operates on a 3.3-V supply input (same level as I/O supply) for all read, program, and erase operations.

When in pipeline mode, the flash operates with a system clock frequency of up to 180 MHz. The SRAM

supports single-cycle read and write accesses in byte, halfword, word, and double-word modes throughout

the supported frequency range.

The TMS570LS1114 device features peripherals for real-time control-based applications, including two

Next Generation High-End Timer (N2HET) timing coprocessors with up to 44 I/O terminals, seven

Enhanced Pulse Width Modulator (ePWM) modules with up to 14 outputs, six Enhanced Capture (eCAP)

modules, two Enhanced Quadrature Encoder Pulse (eQEP) modules, and two 12-bit Analog-to-Digital

Converters (ADCs) supporting up to 24 inputs.

The N2HET is an advanced intelligent timer that provides sophisticated timing functions for real-time

applications. The timer is software-controlled, using a reduced instruction set, with a specialized timer

micromachine and an attached I/O port. The N2HET can be used for pulse-width-modulated outputs,

capture or compare inputs, or general-purpose I/O (GIO). The N2HET is especially well suited for

applications requiring multiple sensor information and drive actuators with complex and accurate time

pulses. A High-End Timer Transfer Unit (HTU) can perform DMA-type transactions to transfer N2HET data

to or from main memory. A Memory Protection Unit (MPU) is built into the HTU.

The ePWM module can generate complex pulse width waveforms with minimal CPU overhead or

intervention. The ePWM is easy to use and it supports both high-side and low-side PWM and deadband

generation. With integrated trip zone protection and synchronization with the on-chip MibADC, the ePWM

module is ideal for digital motor control applications.

The eCAP module is essential in systems where the accurately timed capture of external events is

important. The eCAP can also be used to monitor the ePWM outputs or for simple PWM generation when

the eCAP is not needed for capture applications.

The eQEP module is used for direct interface with a linear or rotary incremental encoder to get position,

direction, and speed information from a rotating machine as used in high-performance motion and

position-control systems.

Device Overview

Submit Documentation Feedback

Product Folder Links: TMS570LS1114

TMS570LS1114 датащи(PDF) 2 Page - Texas Instruments

TMS570LS1114 датащи(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL