| поискавой системы для электроныых деталей |
|
PCA9620 датащи(PDF) 47 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
PCA9620 датащи(HTML) 47 Page - NXP Semiconductors |
|
47 / 71 page ![]() PCA9620 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2010. All rights reserved. Product data sheet Rev. 1 — 9 December 2010 47 of 71 NXP Semiconductors PCA9620 Universal LCD driver for low multiplex rates In Figure 41 an example is shown for 1:4 multiplex drive mode where the displayed data is read from the first four rows of the memory (bank 0), while the transmitted data is stored in the second four rows of the memory (bank 4) which is currently not accessed for the reading. Therefore different content can be loaded into the first and second four RAM rows which will be immediately displayed on the LCD by switching it with the output-bank-select command (see Figure 42). 7.9.2.1 Input-bank-select The input-bank-select command (see Table 18 on page 10) loads display data into the display RAM in accordance with the selected LCD drive configuration. • In static drive mode, an individual content can be stored in each RAM bank (bank 0 to bank 7 which corresponds to row 0 to row 7). • In 1:2 multiplex drive mode, individual content for RAM bank 0 (row 0 and row 1), RAM bank 2 (row 2 and row 3), RAM bank 4 (row 4 and 5) and RAM bank 6 (row 6 and row 7) can be stored. • In 1:4 multiplex drive mode individual content can be stored in RAM bank 0 (row 0 to row 3) and RAM bank 4 (row 4 to row 7). The input-bank-select command works independently to the output-bank-select. Fig 41. Example of bank selection in 1:4 multiplex mode Fig 42. Example of the input-bank-select and the output-bank-select command with multiplex drive mode 1:4 MICROCONTROLLER DISPLAY RAM BANK 0 BANK 4 013aaa422 INPUT-BANK-SELECT COMMAND CONTROLS THE INPUT DATA PATH OUTPUT-BANK-SELECT COMMAND CONTROLS THE OUTPUT DATA PATH 4 5 6 7 display RAM columns/segment outputs (S) columns display RAM rows/ backplane outputs (BP) rows 013aaa424 0 1 2 34 56 7 55 56 57 58 59 0 1 2 3 to the LCD output RAM bank input RAM bank to the RAM |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |