| поискавой системы для электроныых деталей |
|
TMP93CS32F датащи(PDF) 123 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMP93CS32F датащи(HTML) 123 Page - Toshiba Semiconductor |
|
123 / 180 page ![]() TMP93CS32 2004-02-10 93CS32-121 3. Serial clock generation circuit This circuit generates the basic clock for transmitting and receiving data. • I/O interface mode When in SCLK output mode with the setting of SC0CR<IOC> = “0”, the basic clock will be generated by dividing by 2 the output of the baud rate generator described before. When in SCLK input mode with the setting of SC0CR<IOC> = “1”, the rising edge or falling edge will be detected according to the setting of SC0CR<SCLKS> register to generate the basic clock. • UART mode According to the setting of SC0MOD<SC1:0>, the above baud rate generator clock, internal clock φ1 (Max 625 kbps at fc = 20 MHz), the match detect signal from timer 2, or external clock SCLK0 will be selected to generate the basic clock SIOCLK. 4. Receiving counter The receiving counter is a 4-bit binary counter used in UART mode and counts up by SIOCLK clock. 16 pulses of SIOCLK are used for receiving 1 bit of data, and the data bit is sampled three times at 7th, 8th, and 9th clock. With the three samples, the received data is evaluated by the rule of majority. For example, if the sampled data bit is “1”, “0”, and “1” at 7th, 8th, and 9th clock respectively, the received data is evaluated as “1”. The sampled data “0”, “0”, and “1” is evaluated that the received data is “0”. 5. Receiving control • I/O interface mode When in SCLK0 output mode with the setting of SC0CR<IOC> = “0”, RXD0 signal will be sampled at the rising edge of shift clock which is output to SCLK0 pin. When in SCLK0 input mode with the setting SC0CR<IOC> = “1” RXD0 signal will be sampled at the rising edge or falling edge of SCLK0 input according to the setting of SC0CR<SCLKS> register. • UART mode The receiving control has a circuit for detecting the start bit by the rule of majority. When two or more “0” are detected during 3 samples, it is recognized as start bit and the receiving operation is started. Data being received are also evaluated by the rule of majority. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |