| поискавой системы для электроныых деталей |
|
TMP93CS32F датащи(PDF) 24 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMP93CS32F датащи(HTML) 24 Page - Toshiba Semiconductor |
|
24 / 180 page ![]() TMP93CS32 2004-02-10 93CS32-22 Table 3.3.5 Pin States in STOP Mode Pin Name I/O <DRVE> = 0 <DRVE> = 1 P00 to P07 Input mode Output mode AD0 to AD7 ∆ High-Z High-Z ∆ Output High-Z P10 to P17 Input mode Output mode/A8 to A15 AD8 to AD15 ∆ High-Z High-Z ∆ Output High-Z P20 to P27 Input mode Output mode, A0 to A7/A16 to A23 ∆ ∆ ∆ Output P30 ( RD ), P31 ( WR ) Output High-Z Output P32 ( HWR ) Input mode Output mode PU* PU* PU Output P35 Input mode Output mode Invalid High-Z Invalid Output P41 to P47 Input mode Output mode Invalid High-Z Invalid Output P50 to P55 Input ∆ ∆ P60 to P65 Input mode Output mode PU* PU* PU Output P70, P71 Input mode Output mode Invalid High-Z Invalid Output NMI Input Input Input ALE Output (<ALEEN> = 1) “L” level output “L” level output CLK Output (<CLKEN> = 1) High-Z “H” level output RESET Input Input Input EA Input “H” level fix “H” level fix AM8/ 16 AM Input “H” level fix “H” level fix X1 Input Invalid Invalid X2 Output “H” level output “H” level output Input: Input gate in operation. Fix input voltage to 0 or 1 so that the input pin stays constant. Output: Output state Invalid: Input is not accepted. High-Z: Output is at high impedance. PU: Programmable pull-up pin in input gate in operation. Fix the pin to avoid through current since the input gate operates when a pull-up pin resistance is not set. PU*: Programmable pull-up pin in input gate disable state. No through current even if the pin is set to high impedance. ∆: When a HALT instruction is executed and the CPU stops at the address of the port register, an input gate operates. Fix the pin to avoid through current, and change the program. In all other cases, input is not accepted. Note: Port registers are used for controlling programmable pull up. If a pin is also used for an output function (e.g. TO3) and the output function is specified, whether pull up is selected depends on the output function data. If a pin is also used for an input function, whether pull up is selected depends on the port register setting value only. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |