| поискавой системы для электроныых деталей |
|
VT8235 датащи(PDF) 69 Page - VIA Technologies, Inc. |
|
|
|||||||||||||||||||||||||||||
VT8235 датащи(HTML) 69 Page - VIA Technologies, Inc. |
|
69 / 145 page ![]() VT8235 V-Link South Bridge Revision 1.22 October 24, 2002 -63- Device 17 Function 0 Bus Control Registers UrpuytvrÃDp XrÃ8rp Offset 48 – Read Pass Write Control ...............................RW 7 APIC FSB Fixed at Low DW 0 Disable (Address Bit-2 not masked)...... default 1 Enable (force A2 from APIC FSB to low) Address bit A2 controls whether data is in the lower (0) or upper (1) doubleword of a quadword sent to the CPU. When this bit is enabled, A2 is masked which means it is always 0 to select the lower doubleword. 6-4 Reserved ........................................ always reads 0 3 AC97 / LPC Read Pass Write 0 Disable (a read cannot be performed before a preceeding write has been completed) .. default 1 Enable (internal AC97 and LPC devices are allowed to perform a read before a preceeding write) 2 IDE Read Pass Write 0 Disable (a read cannot be performed before a preceeding write has been completed) .. default 1 Enable (the internal IDE controller is allowed to perform a read before a preceeding write) 1 USB Read Pass Write 0 Disable (a read cannot be performed before a preceeding write has been completed) .. default 1 Enable (the internal USB controllers are allowed to perform a read before a preceeding write) 0 NIC Read Pass Write 0 Disable (a read cannot be performed before a preceeding write has been completed) .. default 1 Enable (the internal LAN controller is allowed to perform a read before a preceeding write) Offset 49 – CCA Control .................................................. RW 7 Reserved ........................................always reads 0 6 South Bridge Internal Master Devices Priority Higher Than External PCI Master 0 Disable ................................................... default 1 Enable The “CCA” is an internal arbiter that controls the priority of external PCI masters vs. internal master devices. Normally priority is the same for internal and external PCI master devices, but when this bit is enabled, internal master devices are given higher priority than external PCI masters (3/4 : 1/4). 5 CCA Clean to Mask Off IRQ Controls whether interrupt requests are gated until data is written to memory. 0 Disable ................................................... default 1 Enable 4-3 Reserved (Do Not Program) ....................default = 0 2 WSC Mask Off INTR Controls whether INTR is masked until write snoop is complete. 0 Disable ................................................... default 1 Enable 1-0 Reserved (Do Not Program) ....................default = 0 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |