H838532H datasheet(137/508 Pages) RENESAS

137 / 508 page

Section 5 Power-Down Modes

Rev. 1.00 May 30, 2008 Page 117 of 484

REJ09B0436-0100

(4) Time for Direct Transition from Subactive Mode to Active (Medium-Speed) Mode

A direct transition from subactive mode to active (medium-speed) mode is performed by

executing a SLEEP instruction in subactive mode while bit SSBY is set to 1 and bit LSON is

cleared to 0 in SYSCR1, bits MSON and DTON are both set to 1 in SYSCR2, and bit TMA3 is set

to 1 in TMA. The time from execution of the SLEEP instruction to the end of interrupt exception

handling (the direct transition time) is given by equation (4) below.

Direct transition time = { (Number of SLEEP instruction execution states) + (number of internal

processing states) }

× (tsubcyc before transition) + { (wait time set in

STS2 to STS0) + (number of interrupt exception handling execution

states) }

× (tcyc after transition)

........................ (4)

Example: Direct transition time = (2 + 1)

× 8tw + (8192 + 14) × 16tosc = 24tw + 131296tosc

(when

φw/8 or φ8 is selected as the CPU operating clock, and wait time = 8192 states)

Notation:

tosc:

OSC clock cycle time

tw:

Watch clock cycle time

tcyc:

System clock (

φ) cycle time

tsubcyc: Subclock (

SUB) cycle time

5.8.3

Notes on External Input Signal Changes before/after Direct Transition

1. Direct transition from active (high-speed) mode to subactive mode

Since the mode transition is performed via watch mode, see section 5.3.5, Notes on External

Input Signal Changes before/after Standby Mode.

2. Direct transition from active (medium-speed) mode to subactive mode

Since the mode transition is performed via watch mode, see section 5.3.5, Notes on External

Input Signal Changes before/after Standby Mode.

3. Direct transition from subactive mode to active (high-speed) mode

Since the mode transition is performed via watch mode, see section 5.3.5, Notes on External

Input Signal Changes before/after Standby Mode.

4. Direct transition from subactive mode to active (medium-speed) mode

Since the mode transition is performed via watch mode, see section 5.3.5, Notes on External

Input Signal Changes before/after Standby Mode.

H838532H датащи(PDF) 137 Page - Renesas Technology Corp

H838532H датащи(HTML) 137 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL