 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
UCS81003 датащи(PDF) 68 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UCS81003 датащи(HTML) 68 Page - Microchip Technology |
|
|
68 / 108 page  UCS81003 DS20005334A-page 68 2014 Microchip Technology Inc. bit 2-0 STIM1<2:0>: Determines the Stimulus 1 that is used as shown below. Note that the lower threshold for the window comparator option is fixed at 400 mV and only applies to the DPOUT pin. This setting cannot be used for the DMOUT port. 000 =VBUS voltage ready to be applied before port power switch is closed. Next stimulus will not wait for this to be removed. 001 = DPOUT voltage is higher than the threshold (S1_TH). 010 = Window comparator. DPOUT voltage is lower than the threshold (S1_TH) and DPOUT voltage higher than the fixed threshold. 011 =DMOUT voltage is higher than the threshold (S1_TH). 100 = Do not use. 101 = Do not use. 110 =DPOUT voltage is higher than the threshold (S1_TH). 111 =VBUS voltage is present after port power switch is closed. Next stimulus will not wait for this to be removed. REGISTER 10-25: PRELOADED EMULATION STIMULUS 1 CONFIGURATION 2 REGISTER (ADDRESS 32H) R-0 R-0 R-1 R-0 R-0 R-1 R-1 R-0 S1_R1MAG<3:0> S1_R1<3:0> bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown bit 7-4 S1_R1MAG<3:0>:Determines the magnitude of the response to the stimulus. The bit decode changes meaning based on which response was selected. Data written to any field that is identified as ‘do not use’ will not be accepted. The data will not be updated and the settings will remain set at the previous value. • For S1_R1 settings 0000 - 0011, the response is a voltage applied on DPOUT/DMOUT pins. The S1_R1MAG bits specify the voltage relative to ground: • For S1_R1 settings 0100, 0111, 1101 - 1111, the response is a resistor connected on DPOUT/DMOUT to GND or VBUS. The S1_R1MAG bits specify the resistor value: • For S1_R1 settings 0110, 1001, 1100, the response is a voltage divider applied from VBUS to GND with “center” at DPOUT/DMOUT. The S1_R1MAG bits specify the minimum resistance of the voltage divider (Sum of R1 + R2): REGISTER 10-24: PRELOADED EMULATION STIMULUS 1 CONFIGURATION 1 REGISTER (ADDRESS 31H) (CONTINUED) 0000 = Pull Down 0110 = 600 mV 1100 = 1800 mV 0001 =400 mV 0111 = 700 mV 1101 = 2000 mV 0010 =400 mV 1000 = 800 mV 1110 = 2200 mV 0011 =400 mV 1001 = 900 mV 1111 = Do not use 0100 =400 mV 1010 = 1400 mV 0101 =500 mV 1011 = 1600 mV 0000 =1.8 k 0110 =40 k 1100 =100 k 0001 =10 k 0111 =43 k 1101 =120 k 0010 =15 k 1000 =50 k 1110 =150 k 0011 =20 k 1001 =60 k 1111 = Do not use 0100 =25 k 1010 =75 k 0101 =30 k 1011 =80 k 0000 =93 k 0110 = 200 k 1100 =200 k 0001 =100 k 0111 = 200 k 1101 =200 k 0010 =125 k 1000 =93 k 1110 =200 k 0011 =150 k 1001 = 100 k 1111 = Do not use 0100 =200 k 1010 = 125 k 0101 =200 k 1011 = 150 k |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
