| поискавой системы для электроныых деталей |
|
UCS81003 датащи(PDF) 27 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UCS81003 датащи(HTML) 27 Page - Microchip Technology |
|
27 / 108 page ![]() 2014 Microchip Technology Inc. DS20005334A-page 27 UCS81003 Table 5-2 shows the settings for the various power states, except Off and Error. If VDD <VDD_TH, the UCS81003 is in the Off state. To determine the mode of operation in the Active state, see Table 9-1. Note: Using configurations not listed in Table 5-2 is not recommended and may produce undesirable results. TABLE 5-2: POWER STATES CONTROL SETTINGS Power State VS PWR_EN S0 M1, M2, EM_EN Portable Device Attached Behavior Sleep n/a disabled 0 Not set to Data Pass-Through. (Note 1) n/a • All switches disabled. •VBUS will be near ground potential. • The UCS81003 wakes to respond to SMBus communications. n/a enabled 0 All = 0b n/a Detect (see Section 8.0 “Detect State” n/a disabled 1 n/a n/a • High-Speed switch disabled (by default). • Port power switch disabled. • Host-Controlled transition to Active state (see Section 5.1.3.2 “Host-Controlled Transition from Detect to Active”). < VS_UVLO enabled 1 All 0b n/a > VS_UVLO enabled 1 All 0b No • High-Speed switch disabled (by default). • Automatic transition to Active state when conditions met (see Section 5.1.3.1 “Automatic Transition from Detect to Active”). Active (see Section 9.0 “Active State”) > VS_UVLO enabled 0 All 0b n/a • High-Speed switch enabled/disabled based on mode. • Port power switch is on at all times. • Attach and Removal Detection disabled. See Note 2. > VS_UVLO enabled 1 All 0b Yes • Port power switch is on. • Removal Detection enabled. Note 1: In order to transition from Active State Data Pass-through mode into Sleep with these settings, change the M1, M2 and EM_EN pins before changing the PWR_EN pin. See Section 9.4 “Data Pass-Through (No Charger Emulation)”. 2: If S0 = ’0’ and a portable device is not attached in DCE Cycle mode, the UCS81003 will be cycling through charger emulation profiles (by default). There is no guarantee which charger emulation profile will be applied first when a portable device attaches. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |