| поискавой системы для электроныых деталей |
|
UCS81003 датащи(PDF) 66 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UCS81003 датащи(HTML) 66 Page - Microchip Technology |
|
66 / 108 page ![]() UCS81003 DS20005334A-page 66 2014 Microchip Technology Inc. 10.12 Preloaded Emulation Configuration Registers The Preloaded Emulation Configuration registers store the settings loaded from internal memory as required for the preloaded charger emulation profile that is actively being applied. These registers are read only. The Legacy charger emulation profiles, the BC1.2 SDP, and the BC1.2 DCP charger emulation profile do not use the Stimulus 3 Configuration registers (39h - 3Bh). Whenever these charger emulation profiles are applied, registers 39h - 3Bh will not be updated and their contents should be ignored. Whenever a Legacy charger emulation profile is applied within the DCE Cycle, these controls will not be updated and should be ignored. These settings are only used by the BC1.2 CDP and BC1.2 DCP charger emulation profiles. The contents of registers 31h, 35 and 39h are not retained in Sleep. They are updated as needed. The contents of registers 32h, 33h, 34h, 36h, 37h, 38h, 3Ah, 3Bh, 40h are retained in Sleep. 10.12.1 APPLIED CHARGER EMULATION REGISTER The contents of this register are not retained in Sleep. The contents are updated as the charger emulation profile being applied changes. REGISTER 10-22: LEGACY EMULATION TIMEOUT CONFIG 2 REGISTER (ADDRESS 24H) U-x U-x R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-1 — — L5EM_TO<1:0> L6EM_TO<1:0> L7EM_TO<1:0> bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown bit 7-6 Unimplemented bit 5-4 L5EM_TO<1:0>: Defines the tEM_TIMEOUT setting, as shown below. Is applied when the Legacy 5 charger emulation profile is used during the DCE Cycle. 00 = 0.8s 01 = 1.6s 10 = 6.4s 11 = 12.8s bit 3-2 L6EM_TOV<1:0>: Defines the tEM_TIMEOUT setting, as shown below. Is applied when the Legacy 6 charger emulation profile is used during the DCE Cycle. 00 = 0.8s 01 = 1.6s 10 = 6.4s 11 = 12.8s bit 1-0 L7EM_TO<1:0>: Defines the tEM_TIMEOUT setting, as shown below. Is applied when the Legacy 7 charger emulation profile is used during the DCE Cycle. 00 = 0.8s 01 = 1.6s 10 = 6.4s 11 = 12.8s Name Bits Address Cof Default Applied Charger Emulation 8 30h R 00h Preloaded Emulation Stimulus 1 - Config 1 8 31h R 00h Preloaded Emulation Stimulus 1 - Config 2 8 32h R 26h Preloaded Emulation Stimulus 1 - Config 3 8 33h R 00h Preloaded Emulation Stimulus 1 - Config 4 8 34h R 02h Preloaded Emulation Stimulus 2 - Config 1 8 35h R 00h Preloaded Emulation Stimulus 2 - Config 2 8 36h R 09h Preloaded Emulation Stimulus 2 - Config 3 8 37h R 00h Preloaded Emulation Stimulus 2 - Config 4 8 38h R 04h Preloaded Emulation Stimulus 3 - Config 1 8 39h R 00h Preloaded Emulation Stimulus 3 - Config 2 8 3Ah R 00h Preloaded Emulation Stimulus 3 - Config 3 8 3Bh R 00h |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |