| поискавой системы для электроныых деталей |
|
LP3913 датащи(PDF) 37 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
LP3913 датащи(HTML) 37 Page - Texas Instruments |
|
37 / 70 page ![]() Li-Ion Cell Q2 Q1 USBPWR VDD VBATT CHG_DET Adapter USB LP3913 www.ti.com SNVS489I – NOVEMBER 2006 – REVISED SEPTEMBER 2013 Charge Status Indication Two LEDs connected to the LP3913 are used to indicate the status of the charging. The CHG pin is connected to a red LED that is enabled when an external power source is connected and the battery is charging. The second STAT pin is connected to a green LED. When the battery charging transitions from CC to CV mode, then the green LED is blinking with a 50% duty cycle and a period of 1 second. When the battery is fully charged, then the green LED is always on. Both LEDs are off when there is no external power connected. Table 3. Truth Table for the LED Status Indicators Condition RED LED GREEN LED No Charger or USB OFF OFF Charger off ON OFF Pre-Qualification ON OFF Constant Current CC ON OFF Constant Voltage CV ON 50% duty cycle EOC / Top-OFF charging ON ON Charge cycle complete ON ON ERROR (Battery Temp, Thermal shutdown) 50% duty cycle OFF Safety Timer Expired 50% duty cycle OFF 50% duty cycle indicates the LED is pulsed on/off for equal times at a frequency of 1 Hz. The RED pin and GREEN pin are connected to a regulated driver to ensure that the brightness is independent from the external power. The LEDs need to be connected between the CHG / STAT pins and GND. Thermal Charger Power FET Regulation The internal power FET Q2 in the linear charger module is thermally regulated to the junction temperature of 115°C to ensure optimal charging of the battery. The charge current is limited by the charge current selected in the Charger Control Register but is also thermally limited to prevent the junction from overheating during high charge currents at high ambient temperatures as the package power dissipation is limited. Thermal regulation ensures maximum charge current and superior charge rate without exceeding the power dissipation limits of LP3913. Copyright © 2006–2013, Texas Instruments Incorporated Submit Documentation Feedback 37 Product Folder Links: LP3913 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |