AM79C972BVCW datasheet(116/130 Pages) AMD

116 / 130 page

116

Am79C972

H_RESET,

S_RESET,

STOP.

11-8

RLEN

Contains a copy of the receive

encoded ring length (RLEN) read

from the initialization block during

Am79C972 controller initializa-

tion. This field is written during

the Am79C972 controller initial-

ization routine.

Read accessible only when either

the STOP or the SPND bit is set.

Write operations have no effect

and should not be performed.

RLEN is only defined after initial-

ization. These bits are unaffected

H_RESET,

S_RESET,

STOP.

7-0

RES

Reserved locations. Read as 0s.

Write operations are ignored.

CSR7: Extended Control and Interrupt 2

Certain bits in CSR7 indicate the cause of an interrupt.

The register is designed so that these indicator bits are

cleared by writing ones to those bit locations. This

means that the software can read CSR7 and write back

the value just read to clear the interrupt condition.

Bit

Name

Description

31-16

RES

Reserved locations. Written as

zeros and read as undefined.

FASTSPNDE

Fast Suspend Enable. When

FASTSPNDE is set to 1, the

Am79C972 controller performs a

fast

suspend

whenever

the

SPND bit is set.

When a fast suspend is request-

ed, the Am79C972 controller per-

forms a quick entry into the

suspend mode. At the time the

SPND bit is set, the Am79C972

controller will complete the DMA

process of any transmit and/or re-

ceive packet that had already be-

gun DMA activity. In addition, any

transmit packet that had started

transmission will be fully transmit-

ted and any receive packet that

had begun reception will be fully

received. However, no additional

packets will be transmitted or re-

ceived and no additional transmit

or receive DMA activity will begin.

Hence, the Am79C972 controller

may enter the suspend mode

with

transmit

and/or

receive

packets still in the FIFOs or the

SRAM.

When FASTSPNDE is 0 and the

SPND bit is set, the Am79C972

controller may take longer before

entering the suspend mode. At

the time the SPND bit is set, the

Am79C972 controller will com-

plete the DMA process of a trans-

mit packet if it had already begun

and the Am79C972 controller will

completely

receive

packet if it had already begun.

Additionally, all transmit packets

stored in the transmit FIFOs and

the transmit buffer area in the

SRAM (if one is enabled) will be

transmitted and all receive pack-

ets stored in the receive FIFOs,

and the receive buffer area in the

SRAM (if one is enabled) will be

transferred into system memory.

Since the FIFO and SRAM con-

tents are flushed, it may take

much

longer

before

the

Am79C972 controller enters the

suspend mode. The amount of

time that it takes depends on

many factors including the size of

the SRAM, bus latency, and net-

work traffic level.

When a write to CSR5 is per-

formed with bit 0 (SPND) set to 1,

the value that is simultaneously

written to FASTSPNDE is used to

determine which approach

used to enter suspend mode.

Read/Write accessible always.

FASTSPNDE

cleared

H_RESET, S_RESET or by set-

ting the STOP bit.

RXFRTG

Receive Frame Tag. When Re-

ceive Frame Tag is set to 1, a tag

word is put into the receive de-

scriptor supplied by the EADI.

See the section Receive Frame

Tagging for details. This bit is

valid only when the EADISEL

(BCR2, bit 3) is set to 1.

Read/Write accessible always.

RXFRTG

cleared

H_RESET. RXFRTG is unaffect-

AM79C972BVCW датащи(PDF) 116 Page - Advanced Micro Devices

AM79C972BVCW датащи(HTML) 116 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL