M68ICS08GR datasheet(197/408 Pages) FREESCALE

197 / 408 page

Monitor ROM (MON)

Functional Description

MC68HC908GR8 — Rev 4.0

Technical Data

MOTOROLA

Monitor ROM (MON)

197

15.4.4 Baud Rate

The communication baud rate is controlled by the crystal frequency upon

entry into monitor mode. The divide by ratio is 1024.

If monitor mode was entered with VDD on IRQ, then the divide by ratio is

also set at 1024. If monitor mode was entered with VSS on IRQ, then the

internal PLL steps up the external frequency, presumed to be 32.768

kHz, to 2.4576 MHz. These latter two conditions for monitor mode entry

require that the reset vector is blank.

Table 15-3 lists external frequencies required to achieve a standard

baud rate of 9600 BPS. Other standard baud rates can be accomplished

using proportionally higher or lower frequency generators. If using a

crystal as the clock source, be aware of the upper frequency limit that the

internal clock module can handle. See 5.0 V Control Timing and 3.0 V

Control Timing for this limit.

15.4.5 Commands

The monitor ROM firmware uses these commands:

•

READ (read memory)

•

WRITE (write memory)

•

IREAD (indexed read)

•

IWRITE (indexed write)

•

READSP (read stack pointer)

•

RUN (run user program)

Table 15-3. Monitor Baud Rate Selection

External

Frequency

IRQ

Internal

Frequency

Baud Rate

(BPS)

9.8304 MHz

VTST

2.4576 MHz

9600

9.8304 MHz

VDD

2.4576 MHz

9600

32.768 kHz

VSS

2.4576 MHz

9600

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

M68ICS08GR датащи(PDF) 197 Page - Freescale Semiconductor, Inc

M68ICS08GR датащи(HTML) 197 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL