OR2C04A datasheet(37/192 Pages) ETC

37 / 192 page

Lucent Technologies Inc.

Data Sheet

June 1999

ORCA Series 2 FPGAs

Programmable Corner Cells

Programmable Routing

The programmable corner cell (PCC) contains the cir-

cuitry to connect the routing of the two PICs in each

corner of the device. The PIC PX1 and PX2 lines are

directly connected together from one PIC to another.

The PIC PXL lines are connected from one block to

another through tridirectional buffers. Four CIPs in

each corner connect the four PXH lines from each side

of the device.

Special-Purpose Functions

In addition to routing functions, special-purpose func-

tions are located in each FPGA corner. The upper-left

PCC contains connections to the boundary-scan logic.

The upper-right PCC contains connections to the read-

back logic and the connectivity to the global 3-state

signal (TS_ALL). The lower-left PCC contains connec-

tions to the internal oscillator.

The lower-right PCC contains connections to the start-

up and global reset logic. During configuration, the

RESET

input pad always initiates a configuration abort,

as described in the FPGA States of Operation section.

After configuration, the global set/reset signal (GSRN)

can either be disabled (the default), directly connected

to the RESET input pad, or sourced by a lower-right

corner signal. If the RESET input pad is not used as a

global reset after configuration, this pad can be used as

a normal input pad. During start-up, the release of the

global set/reset, the release of the I/Os, and the

release of the external DONE signal can each be timed

individually based upon the start-up clock. The start-up

clock can come from CCLK or it can be routed into the

start-up block using the lower-right corner routing

resources. More details on start-up can be found in the

FPGA States of Operation section.

Clock Distribution Network

The

ORCA Series 2 clock distribution schemes use pri-

mary and secondary clocks. This provides the system

designer with additional flexibility in assigning clock

input pins.

One advantage is that board-level clock traces routed

to the FPGA are shorter. On a PC board, the added

length of high-speed clock traces routed to dedicated

clock input pins can significantly increase the parasitic

impedances. The primary advantage of the

ORCA

clock distribution is the availability of a large number of

clocks, since all I/O pins are configurable as clocks.

Primary Clock

The primary clock distribution is shown in Figure 34. If

the clock signal is from an I/O pad, it can be driven onto

a clock line. The clock lines do not provide clock signals

directly to the PFU; they act as clock spines from which

clocks are branched to XL lines. The XL lines then feed

the clocks to PFUs. A multiplexer in each PLC is used

to transition from the clock spine to the branch.

For a clock spine in the horizontal direction, the inputs

into the multiplexer are the two lines from the left and

right PICs (CKL and CKR) and the local clock line from

the perpendicular direction (HCK). This signal is then

buffered and driven onto one of the vertical XL lines,

forming the branches. The same structure is used for a

clock spine in the vertical direction. In this case, the

multiplexer selects from lines from the top and bottom

PICs (CKT, CKB, and VCK) and drives the signal onto

one of the horizontal XL lines.

Figure 34 illustrates the distribution of the low-skew pri-

mary clock to a large number of loads using a main

spine and branches. Each row (column) has two dedi-

cated clock lines originating from PICs on opposite

sides of the array. The clock is input from the pads to

the dedicated clock line CKT to form the clock spine

(see Figure 34, Detail A). From the clock spine, net

branches are routed using horizontal XL lines and then

PLC clock inputs are tapped from the XL lines, as

shown in Figure 34, Detail B.

OR2C04A датащи(PDF) 37 Page - List of Unclassifed Manufacturers

OR2C04A датащи(HTML) 37 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL