MSP430 datasheet(69/96 Pages) TI2

69 / 96 page

MSP430G2533, MSP430G2433, MSP430G2333, MSP430G2233

MSP430G2403, MSP430G2303, MSP430G2203

www.ti.com

SLAS734G – APRIL 2011 – REVISED APRIL 2016

Submit Documentation Feedback

Product Folder Links: MSP430G2533 MSP430G2433 MSP430G2333 MSP430G2233 MSP430G2403 MSP430G2303

MSP430G2203

Device and Documentation Support

User's Guides

MSP430x2xx Family User's Guide Detailed information on the modules and peripherals available in this

device family.

Code Composer Studio v6.1 for MSP430 User's Guide This manual describes the use of TI Code

Composer Studio IDE v6.1 (CCS v6.1) with the MSP430 ultra-low-power microcontrollers.

This document applies only for the Windows version of the Code Composer Studio IDE. The

Linux version is similar and, therefore, is not described separately.

IAR Embedded Workbench Version 3+ for MSP430 User's Guide This manual describes the use of

IAR Embedded Workbench (EW430) with the MSP430 ultra-low-power microcontrollers.

MSP430 Programming With the Bootloader (BSL) The MSP430 bootloader (BSL, formerly known as

the bootstrap loader) allows users to communicate with embedded memory in the MSP430

microcontroller during the prototyping phase, final production, and in service. Both the

programmable memory (flash memory) and the data memory (RAM) can be modified as

required. Do not confuse the bootloader with the bootstrap loader programs found in some

digital signal processors (DSPs) that automatically load program code (and data) from

external memory to the internal memory of the DSP.

MSP430 Programming Via the JTAG Interface This document describes the functions that are required

to erase, program, and verify the memory module of the MSP430 flash-based and FRAM-

based microcontroller families using the JTAG communication port. In addition, it describes

how to program the JTAG access security fuse that is available on all MSP430 devices. This

document describes device access using both the standard 4-wire JTAG interface and the 2-

wire JTAG interface, which is also referred to as Spy-Bi-Wire (SBW).

MSP430 Hardware Tools User's Guide This manual describes the hardware of the TI MSP-FET430

Flash Emulation Tool (FET). The FET is the program development tool for the MSP430 ultra-

low-power microcontroller. Both available interface types, the parallel port interface and the

USB interface, are described.

Application Reports

MSP430 32-kHz Crystal Oscillators Selection of the right crystal, correct load circuit, and proper board

layout are important for a stable crystal oscillator. This application report summarizes crystal

oscillator function and explains the parameters to select the correct crystal for MSP430 ultra-

low-power operation. In addition, hints and examples for correct board layout are given. The

document also contains detailed information on the possible oscillator tests to ensure stable

oscillator operation in mass production.

MSP430 System-Level ESD Considerations System-Level ESD has become increasingly demanding

with silicon technology scaling towards lower voltages and the need for designing cost-

effective and ultra-low-power components. This application report addresses three different

ESD topics to help board designers and OEMs understand and design robust system-level

designs: (1) Component-level ESD testing and system-level ESD testing, their differences

and why component-level ESD rating does not ensure system-level robustness. (2) General

design guidelines for system-level ESD protection at different levels including enclosures,

cables, PCB layout, and on-board ESD protection devices. (3) Introduction to System

Efficient ESD Design (SEED), a co-design methodology of on-board and on-chip ESD

protection to achieve system-level ESD robustness, with example simulations and test

results. A few real-world system-level ESD protection design examples and their results are

also discussed.

MSP430 датащи(PDF) 69 Page - Texas Instruments

MSP430 датащи(HTML) 69 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96

датащи скачать

ссылки URL