| поискавой системы для электроныых деталей |
|
ADPD6000 датащи(PDF) 28 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADPD6000 датащи(HTML) 28 Page - Analog Devices |
|
28 / 89 page ![]() Data Sheet ADPD6000 APPLICATIONS INFORMATION analog.com Rev. 0 | 28 of 89 Figure 41. One-Region Digital Integration Mode Timing Diagram Figure 42. Two-Region Digital Integration Mode Timing Diagram Table 14. Relevant Settings for Digital Integration Modes Group Time Slot A Register Address Bit Field Name Description Signal Path Setup 0x0120, Bits[13:11] SAMPLE_TYPE_x Set to 0x2 for one-region digital integration mode. Set to 0x3 for two-region digital integration mode. 0x0121, Bits[6:0] AFE_PATH_CFG_x Set to 0x28 for TIA, buffer, and ADC. Use 1x TIA configuration. 0x0122, Bits[7:0] INPxx_x Enable desired inputs. 0x0123, Bits[14:12] PRECON_x Set to 0x5 to precondition anode of photodiode to TIA_VREF. 0x0123, Bits[7:6], Bits[1:0] VCx_SELECT_x Set to 0x2 to set ~215 mV reverse bias across photodiode. 0x0124, Bits[5:0] TIA_GAIN_CHx_x Select TIA gain. 0x0124, Bits[9:8] AFE_TRIM_VREF_x Set to 0x2 to set TIA_VREF = 0.8855 V. 0x0124, Bits[12:11], Bits[14:13] CH1_TRIM_INT_x Set to 0x3 to set buffer gain = 2. 0x125, Bits[13:12] CH1_TRIM_INT_CAP_x Set to 0x1 to 12.6 pF Timing 0x012A, Bits[15:8] NUM_INT_x Set to the number of desired ADC conversions in the dark and lit regions. 0x012A, Bits[7:0] NUM_REPEAT_x Number of sequence repeats. 0x012B, Bits[9:0] MIN_PERIOD_x Set the period. Automatic period calculation is not supported in digital integration mode. 0x0138, Bits[8:0] LIT_OFFSET_x Set to the time of the first ADC conversion in the lit region. 0x0139, Bits[6:0] DARK1_OFFSET_x Set to the time of the first ADC conversion in the Dark 1 region. 0x0139, Bits[15:7] DARK2_OFFSET_x Set to the time of the first ADC conversion in the Dark 2 region. Only used in two-region digital integration mode. LED Settings 0x0129, Bits[1:0] LED_MODEx_x Select LED mode. 0x0128, Bit 15 and Bit 7 LED_DRIVESIDEx_x Select LED for time slot used. 0x0128, Bits[14:8], Bits[6:0] LED_CURRENTx_x Set LED current for selected LED. 0x012C, Bits[7:0] LED_OFFSET_x Sets start time of first LED pulse in 1 μs increments. 0x012C, Bits[15:8] LED_WIDTH_x Sets width of LED pulse in 1 μs increments. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |