| поискавой системы для электроныых деталей |
|
82801E датащи(PDF) 48 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
82801E датащи(HTML) 48 Page - Intel Corporation |
|
48 / 84 page ![]() Intel® 82801E C-ICH 48 Advance Information Datasheet 3.2.20 Power and Ground GPIO[21] O Fixed as Output only. Main power well. GPIO[20:18] O Fixed as Output only. Main power well. GPIO[17:16] O Fixed as Output only. Main Power Well. Can instead be used for PC/PCI GNT[A:B]#. GPIO[17] can also alternatively be used for PCI GNT[5]#. Integrated pull-up resistor. GPIO[15:14] I Not implemented. GPIO[13:12] I Fixed as Input only. Main Power Well. Not muxed. GPIO[11] I Fixed as Input only. Main Power Well. Can instead be used for SMBALERT#. GPIO[10:9] I Not implemented. GPIO[8] I Fixed as Input only. Main Power Well. Not muxed. GPIO[7] I Fixed as Input only. Main power well. Not muxed. GPIO[6] I Fixed as Input only. Main power well. GPIO[5:4] I Fixed as Input only. Main power well. Can be used instead as PIRQ[G:H]#. GPIO[3:2] Reserved. GPIO[1:0] I Fixed as Input only. Main Power Well. Can instead be used for PC/PCI REQ[A:B]#. GPIO[1] can also alternatively be used for PCI REQ[5]#. Table 26. Power and Ground Signals Name Description HUBREF 0.9 V reference for the hub interface. V5REF Reference for 5 V tolerance on Core well inputs. VBIAS RTC well bias voltage. The DC reference voltage applied to this pin sets a current that is mirrored throughout the oscillator and buffer circuitry. See “External RTC Circuitry” on page 50. Vcc1_8 1.8 V supply for Core well logic. Vcc3_3 3.3 V supply for Core well I/O buffers. VccRTC 3.3 V (can drop to 2.0 V min. in G3 state) supply for the RTC well. This power is not expected to be shut off unless the RTC battery is removed or completely drained. NOTE: Implementations should not attempt to clear CMOS by using a jumper to pull VccRTC low. Clearing CMOS in an 82801E C-ICH-based platform can be done by using a jumper on RTCRST# or GPI, or using SAFEMODE strap. V_CPU_IO Powered by the same supply as the processor I/O voltage. This supply is used to drive the processor interface outputs. Vss Ground. Table 25. General Purpose I/O Signals (Sheet 2 of 2) Name Type Description |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |